• April 30, 2024, 09:46:13 pm
« previous next »
Pages: 1 2 3 [4] 5 6 ... 18   Go Down

Author Topic: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!  (Read 101288 times)

0 Members and 1 Guest are viewing this topic.

Offline UpakulRox

  • Retired
  • Respected Member
  • ***
  • Posts: 609
  • Reputation: 184
  • A Symbian Fanboy
    • Symbian-Developers
  • Current Phone: : Nokia N8
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #45 on: February 17, 2012, 12:25:26 am »
Quote from: precado999 on February 17, 2012, 12:04:25 am
Ok After following this my phone is completely dead. My phone will not turn on anymore.

When i try to do a dead phone flash i get the following error:
The flashing failed. Do you want to retry the flashing?

HRESULT 0x8401f141 (-2080247487)

Flash: Boot rom was not detected after phone boot up. Unable to start flashing.


Bro, did u do this perfectly?

1.Flashing ur E6 with RM-596 version 25.007(N8 firmware)[use Phoenix Service Software 2010][use update software button]
2.Flashng ur E6 with RM-596 version 11.005(N8 firmware)[use Phoenix Service Software 2010][use refurbish button]

remember both times YOU NEED TO USE THE N8 FIRMWARE!!!
Logged

Offline roby_tay

  • Forum User
  • **
  • Posts: 95
  • Reputation: 10
  • every choice creates a new reality
    • about me
  • Current Phone: : Nokia N8-00 Delight Belle 3.9
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #46 on: February 17, 2012, 12:26:46 am »
Quote from: precado999 on February 17, 2012, 12:04:25 am
Ok After following this my phone is completely dead. My phone will not turn on anymore.

When i try to do a dead phone flash i get the following error:
The flashing failed. Do you want to retry the flashing?

HRESULT 0x8401f141 (-2080247487)

Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
reinstall flashing cable drivers, and try again
Logged

Offline syarmwawa

  • Retired moderator
  • Forum Ghost
  • ***
  • Posts: 2,638
  • Reputation: 1173
  • SYmbian FTW!!!!!!!
  • Current Phone: : Nokia 5800 & Nokia C7 with Sexy Belle & 701 FTW...
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #47 on: February 17, 2012, 12:36:53 am »
Quote from: precado999 on February 17, 2012, 12:04:25 am
Ok After following this my phone is completely dead. My phone will not turn on anymore.

When i try to do a dead phone flash i get the following error:
The flashing failed. Do you want to retry the flashing?

HRESULT 0x8401f141 (-2080247487)

Flash: Boot rom was not detected after phone boot up. Unable to start flashing.



and for your information....after first flashing with N8 firmware[step 1]...your phone will brick...but don't panic...it normal...just proceed with step no.2....
Logged

Offline precado999

  • Viewer
  • *
  • Posts: 7
  • Reputation: 0
  • Symbian Power User
  • Current Phone: : Nokia E6
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #48 on: February 17, 2012, 01:08:02 am »
Ok I reinstalled the Symbian Belle firmwire to my nokia e6 in dead phone flashing. It is still not working properly but atleast it now boots and my USB is able to read it. Any suggestions on how to proceed from here?

your help is greatly appreciated
Logged

Offline syarmwawa

  • Retired moderator
  • Forum Ghost
  • ***
  • Posts: 2,638
  • Reputation: 1173
  • SYmbian FTW!!!!!!!
  • Current Phone: : Nokia 5800 & Nokia C7 with Sexy Belle & 701 FTW...
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #49 on: February 17, 2012, 01:13:18 am »
Quote from: precado999 on February 17, 2012, 01:08:02 am
Ok I reinstalled the Symbian Belle firmwire to my nokia e6 in dead phone flashing. It is still not working properly but atleast it now boots and my USB is able to read it. Any suggestions on how to proceed from here?

your help is greatly appreciated

can i know after flash with which firmware(which step) ur phone got brick?..coz i already mention at firsr post u phone will brick at first step...second step it still brick but PC will recognize it....
Logged

Offline precado999

  • Viewer
  • *
  • Posts: 7
  • Reputation: 0
  • Symbian Power User
  • Current Phone: : Nokia E6
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #50 on: February 17, 2012, 04:01:03 am »
syarmwawa,

The phone bricked after the first step. Although it did not seem to properly update the firmware. It gave me an error and asked if I wanted to retry again. I said no and disconnected it. After that i could not get it working. I did the normal firmware updates/refurbished. An as I mentioned I did a dead phone update with symbian belle and now at least the phone boots. Anyway you say that after the first firmware update the phone will brick. Do you need to do a dead phone update for the second one?

Right now I am just trying to get my phone up an running even if it is with symbian belle. Im gonna try to resintall the symbian firmware to see what happens.
Logged

Offline precado999

  • Viewer
  • *
  • Posts: 7
  • Reputation: 0
  • Symbian Power User
  • Current Phone: : Nokia E6
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #51 on: February 17, 2012, 04:22:26 am »
Ok Success. I reinstalled the Symbian Belle firmware and now its working properly. For now I am satisfied with that. I will try to downgrade at a later time when I have more time. Probably in a week or so. Anyways to get clarification on the process:

1.Flashing ur E6 with RM-596 version 25.007(N8 firmware)[use Phoenix Service Software 2010][use update software button]
2.Flashng ur E6 with RM-596 version 11.005(N8 firmware)[use Phoenix Service Software 2010][use refurbish button]
3.Flashing ur E6 with the lowest version of ur E6 (E6 firmware)[usePhoenix Service Software 2011][use update software button]
4.Flashing ur E6 with firmware version u want(E6 firmware)[use Phoenix Service Software 2011][use refurbish button]


After the first step the phone will brick. Do you need to do a dead phone update for second step. As I mentioned on the first step it gave me errors and it looks like the firmware update did not succeed. That's probably why my phone bricked so bad.

Thank you all
Logged

Offline syarmwawa

  • Retired moderator
  • Forum Ghost
  • ***
  • Posts: 2,638
  • Reputation: 1173
  • SYmbian FTW!!!!!!!
  • Current Phone: : Nokia 5800 & Nokia C7 with Sexy Belle & 701 FTW...
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #52 on: February 17, 2012, 11:13:45 am »
Quote from: precado999 on February 17, 2012, 04:22:26 am
Ok Success. I reinstalled the Symbian Belle firmware and now its working properly. For now I am satisfied with that. I will try to downgrade at a later time when I have more time. Probably in a week or so. Anyways to get clarification on the process:

1.Flashing ur E6 with RM-596 version 25.007(N8 firmware)[use Phoenix Service Software 2010][use update software button]
2.Flashng ur E6 with RM-596 version 11.005(N8 firmware)[use Phoenix Service Software 2010][use refurbish button]
3.Flashing ur E6 with the lowest version of ur E6 (E6 firmware)[usePhoenix Service Software 2011][use update software button]
4.Flashing ur E6 with firmware version u want(E6 firmware)[use Phoenix Service Software 2011][use refurbish button]


After the first step the phone will brick. Do you need to do a dead phone update for second step. As I mentioned on the first step it gave me errors and it looks like the firmware update did not succeed. That's probably why my phone bricked so bad.

Thank you all

Yes...you rite....flashing failed window will pop up...but the programming is complete...just proceed with second step...don't panic even ur phone bricked....even me also get my phone brick at first step...:)
Logged

Offline PhaseP

  • Viewer
  • *
  • Posts: 3
  • Reputation: 2
  • Symbian Power User
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #53 on: February 19, 2012, 12:19:33 pm »
Quote from: precado999 on February 17, 2012, 04:22:26 am
Ok Success. I reinstalled the Symbian Belle firmware and now its working properly. For now I am satisfied with that. I will try to downgrade at a later time when I have more time. Probably in a week or so. Anyways to get clarification on the process:

1.Flashing ur E6 with RM-596 version 25.007(N8 firmware)[use Phoenix Service Software 2010][use update software button]
2.Flashng ur E6 with RM-596 version 11.005(N8 firmware)[use Phoenix Service Software 2010][use refurbish button]
3.Flashing ur E6 with the lowest version of ur E6 (E6 firmware)[usePhoenix Service Software 2011][use update software button]
4.Flashing ur E6 with firmware version u want(E6 firmware)[use Phoenix Service Software 2011][use refurbish button]


After the first step the phone will brick. Do you need to do a dead phone update for second step. As I mentioned on the first step it gave me errors and it looks like the firmware update did not succeed. That's probably why my phone bricked so bad.

Thank you all

Just finished taking an E6 from Belle to Anna. I had to take some different actions for the steps.

In step 3, I had to do a "USB Dead phone" with "No Connection" and "Refurbish".
In step 4, I had to do a "Update Software"

This was the only way to bring it back.

Logged

Offline UpakulRox

  • Retired
  • Respected Member
  • ***
  • Posts: 609
  • Reputation: 184
  • A Symbian Fanboy
    • Symbian-Developers
  • Current Phone: : Nokia N8
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #54 on: February 19, 2012, 12:20:47 pm »
Quote from: PhaseP on February 19, 2012, 12:19:33 pm
Just finished taking an E6 from Belle to Anna. I had to take some different actions for the steps.

In step 3, I had to do a "USB Dead phone" with "No Connection" and "Refurbish".
In step 4, I had to do a "Update Software"

This was the only way to bring it back.


+1  great!
I will add ur tip to first post :)
Logged

Offline syarmwawa

  • Retired moderator
  • Forum Ghost
  • ***
  • Posts: 2,638
  • Reputation: 1173
  • SYmbian FTW!!!!!!!
  • Current Phone: : Nokia 5800 & Nokia C7 with Sexy Belle & 701 FTW...
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #55 on: February 19, 2012, 01:20:33 pm »
Quote from: PhaseP on February 19, 2012, 12:19:33 pm
Just finished taking an E6 from Belle to Anna. I had to take some different actions for the steps.

In step 3, I had to do a "USB Dead phone" with "No Connection" and "Refurbish".
In step 4, I had to do a "Update Software"

This was the only way to bring it back.



+1 for the tips mate...:D
Logged

Offline pex81

  • Viewer
  • *
  • Posts: 1
  • Reputation: 0
  • Symbian Power User
  • Current Phone: : Nokia E7
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #56 on: February 19, 2012, 02:00:42 pm »
Sorry but this guide is good also for Nokia E7?
I have problem with IBM Lotus Traveler and Symbian Belle and i would rollback to symbian anna.
Thanks.
Logged

Offline kurt.schraepen

  • Viewer
  • *
  • Posts: 1
  • Reputation: 0
  • Symbian Power User
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #57 on: February 19, 2012, 02:17:09 pm »
is it really necessary to use 2 phoenix to go from belle to anna on a Nokia E6?
Logged

Offline syarmwawa

  • Retired moderator
  • Forum Ghost
  • ***
  • Posts: 2,638
  • Reputation: 1173
  • SYmbian FTW!!!!!!!
  • Current Phone: : Nokia 5800 & Nokia C7 with Sexy Belle & 701 FTW...
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #58 on: February 19, 2012, 04:01:42 pm »
Quote from: kurt.schraepen on February 19, 2012, 02:17:09 pm
is it really necessary to use 2 phoenix to go from belle to anna on a Nokia E6?
yes mate....both phoenix needed...
Logged

Offline nenadbad

  • Viewer
  • *
  • Posts: 6
  • Reputation: 0
  • Symbian Power User
  • Current Phone: : c6-01
Re: [Tutorial] Downgrade Symbian Belle/Anna for E6,C7,C6-01,X7,N8!
« Reply #59 on: February 22, 2012, 01:42:29 am »
Hi, I keep getting an error when trying to start Phoenix which looks like a problem with the Nokia Fuse application so i tried to find a copy of Fuse so i could reinstall it but couldn't find it anywhere.

If i click 'ok' on the error message box Phoenix starts up but it won't connect to anything. Please HELP!!!!

Error loading component

HRESULT 0x80040154 (-2147221164)
This means:
Class not registered



Unable to get error message
FinalConstruct- Couldn't Initialize Fuse Services.;Connection Manager=0x8400f017
CreateComponentInstance() - CoCreateInstance function failed for component "NMP.Cmn.fusefn.ConnectionManager";Phoenix Component Manager=0x80040154
 parsing action string 300;Phoenix Menu Extension Manager=0x80040154
Logged
Pages: 1 2 3 [4] 5 6 ... 18   Go Up
« previous next »