Author Topic: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software (Read 224469 times)

tmk8532 · « **Reply #150 on:** September 10, 2013, 05:36:02 am »

Quote from: matthew on September 06, 2013, 02:14:06 am

Mate;
1. Use Software Reset instead of Refurbish
2. Do not turn on the phone. Instead, remove the battery and click Update Software and a dialog box will appear. At this point, insert the battery and click the Ok button to proceed
Maybe try also:
Disable automatic selection and manually select the FW you want to use
Uninstall your Phoenix and install 2012.50. S60 OS9x seems to like v2012.50.

I installed the version you told me and followed your instructions without success. I get the same error as before.
I'm losing hope of getting my phone back to life.

matthew · « **Reply #151 on:** September 10, 2013, 08:15:13 am »

Quote from: tmk8532 on September 10, 2013, 05:36:02 am

I installed the version you told me and followed your instructions without success. I get the same error as before.
I'm losing hope of getting my phone back to life.

There will be no giving up here, mate. what is the absolute path of the directory where you are placing your FW files? Where did you get your files and please list all the files you are using to flash.

tmk8532 · « **Reply #152 on:** September 11, 2013, 10:50:53 pm »

Quote from: matthew on September 10, 2013, 08:15:13 am

There will be no giving up here, mate. what is the absolute path of the directory where you are placing your FW files? Where did you get your files and please list all the files you are using to flash.

I'm using a notebook with Windows 7. Phoenix is installed on :

C:\Program Files\Nokia\Phoenix

All the FW files are on:

C:\Program Files\Nokia\Phoenix\Products\rm-159

I'm no sure from where I got the FW files, because I was searching through many Symbian related sites and most of the links were dead. But the files which I downloaded installed without errors and no viruses. I downloaded a file named RM-159_LTA_35.0.002_v8.0_N95.exe and copied my original FW files (v 30.0.015) from Nokia Suite folder on my computer.
This is the list of the files on RM-159 folder. I'm not sure what files are used on the flash update, since Phoenix select them automatically based on my choice of FW version.

lblprint DIR
RM159_0534862_35.0.002_001 DIR
RM159_0546222_35.0.002_001 DIR
RM159_0549028_30.0.015_007 DIR
adcreadings.ini 587
bluetooth.ini 218
camera_control.ini 980
readme_basic.txt 2558
RM159_30.0.015_037_U01_nsu_uda.fpsx 29234123
RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0534862_35.0.002_001.dcp 15594
RM159_0534862_35.0.002_001.vpl 3693
RM159_0534862_35.0.002_001_signature.bin 797
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM159_0549028_30.0.015_007.dcp 10823
RM159_0549028_30.0.015_007.vpl 4192
RM159_0549028_30.0.015_007_signature.bin 3970
RM159_0557241_35.0.002_001.dcp 15588
RM159_0557241_35.0.002_001.vpl 3684
RM159_0557241_35.0.002_001_signature.bin 797
RM-159_30.0.015_PR.C0R 73756260
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256
rm_159_als.ini 1443
V1RM-159_30.0.015_PR.vB1 12721989

matthew · « **Reply #153 on:** September 12, 2013, 06:04:13 am »

Mate, your file situation is a mess

If those are exactly as they exist on your computer, you would have to rename them to their proper designations (delete the numbers after the files extensions).
You should have six files that more or less are named like these:
Rm-1XX_XX.X.XXX_Pr.c0r
Rm-1XX_XX.X.XXX_Pr.v24
Rm-1XX_XX.X.XXX_Xxx_U06_Uda.fpsx
Rm-1XX_xxxxxxx_XX.X.XXX_001.dcp
Rm-1XX_xxxxxxx_XX.X.XXX_001_Signature.bin
Rm-1XX_xxxxxxx_XX.X.XXX_001.vpl
You said you are in South America, right? What is the model number (RM) under your battery? If you are using a NAM phone (which is RM-160) you should be flashing the SW v35.2.1
You can get the RM-160 files here http://www.mrcrab.net/nokia/Nokia_N95.html?productType=RM-160&releaseID=2493588875&version=35.2.1
RM-159 is here http://www.mrcrab.net/nokia/Nokia_N95.html?productType=RM-159&releaseID=2646703126&version=35.0.2
i would try changing the file names if that is how they are on your computer, though.

tmk8532 · « **Reply #154 on:** October 01, 2013, 08:32:37 am »

Hello again,

Sorry about the delay to answer. I had tons of work to do with a tight deadline....
Anyway, I removed all the files from my note. Did a fresh install of Phoenix.
My phone is RM-159. I downloaded all the files for this model from the site you post the links and placed them on C:\Program Files\Nokia\Phoenix\Products\RM-159.
But now, when I click on "Firmware Update" I receive this message:
"Neither DP1.0 nor DP2.0 was found for the Product, or the Product cannot be identified."

matthew · « **Reply #155 on:** October 01, 2013, 08:40:31 am »

Did you correct the file names? They have to be named like the download links except spaces have to be underscores (ie RM-159_35.0.002_pr.c0r). Also, all my flashing files are in C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\Rm-159\

rsudhakar · « **Reply #156 on:** October 02, 2013, 04:11:34 am »

are you downgrading your phone?
if "yes" then you just killed your phone.....

to make it alive again.... download Pr1.2 through navifirm
flash with that. n then flash with whichever you want to flash.

HOW WILL I DOWNLOAD PR1.2 THROUGH NAVIFIRM?
WHAT DOES PR1.2 MEAN??

rsudhakar · « **Reply #157 on:** October 02, 2013, 04:31:24 am »

I have tried to downgrade my nokia 5130c-2 from v07.97 to v07.95 using phoenix.
It said that downgrade is not allowed, I forcibly continued but the process got
failed and my phone got bricked. Phone is totally dead, when i switch on i see
nothing, no light, no vibration.

When I tried again to flash with v07.97 using phoenix, it says

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode

The flashing failed. Do you want to retry the flashing?

HRESULT 0x8401f141 (-2080247487)

Flash: Boot rom was not detected after phone boot up. Unable to start flashing.

When I tried again to flash with v07.97 using JAF,it says

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\

Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_x
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_x_red
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...

and JAF sometimes says,

JAF version 1.98.62
Detected PKEY: 9000AAC9
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\

Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mh
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_CTV_INDIA_HINDI_red
APE Variant file: NONE
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...............................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone failed to boot in flash mode CMT...

When i tried flashing using BB5 Easy Service Tool with the cfw, it said

DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready

Connect phone on selected interface...

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
PPM2 : rm495__07.97.ppm_x
CNT : rm495__07.97.image_x_red
CNT3 : rm495__07.97.image_x_red
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 01800115091A7E56A28DFD1186902E11D9EE4604
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Wait for device bootup
-> Bootcode start in CMT fail ! Need flash via programming device

-> Error while flashing...

Phone disconected!

Connect phone on selected interface...

I HAVE NO OTHER WAY TO TRY NOW AND GET MY PHONE ALIVE. PLS HELP ME ON THIS.

matthew · « **Reply #158 on:** October 02, 2013, 06:24:49 am »

Quote from: rsudhakar on October 02, 2013, 04:31:24 am

I have tried to downgrade my nokia 5130c-2 from v07.97 to v07.95 using phoenix.
It said that downgrade is not allowed, I forcibly continued but the process got
failed and my phone got bricked. Phone is totally dead, when i switch on i see
nothing, no light, no vibration.
...
I HAVE NO OTHER WAY TO TRY NOW AND GET MY PHONE ALIVE. PLS HELP ME ON THIS.

Mate, the Phoenix and JAF software specifically state downgrading will kill your phone.
Send it to Nokia.

tmk8532 · « **Reply #159 on:** October 02, 2013, 08:23:52 am »

Quote from: matthew on October 01, 2013, 08:40:31 am

Did you correct the file names? They have to be named like the download links except spaces have to be underscores (ie RM-159_35.0.002_pr.c0r). Also, all my flashing files are in C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\Rm-159\

I believe the filenames are correct. Here is my filelist:

RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256

Maybe something else is missing. When I installed the installer package with the firmware I mentioned before, Phoenix did not complain about nothing, but cant flash my phone.
I tried to put those files on the folder you said, but the result is the same.

tmk8532 · « **Reply #160 on:** October 02, 2013, 08:27:49 am »

Quote from: rsudhakar on October 02, 2013, 04:11:34 am

are you downgrading your phone?
if "yes" then you just killed your phone.....
to make it alive again.... download Pr1.2 through navifirm
flash with that. n then flash with whichever you want to flash.

HOW WILL I DOWNLOAD PR1.2 THROUGH NAVIFIRM?
WHAT DOES PR1.2 MEAN??

No, I did not tried to downgrade my phone. I tried to reinstall its software using Nokia Suite, and the process stopped and my phone went dead. It only shows the word Nokia when I turn it on.
Now I'm trying to recover my phone using this tutorial and I'm using a newer firmware for my model.

matthew · « **Reply #161 on:** October 02, 2013, 08:43:07 am »

Quote from: tmk8532 on October 02, 2013, 08:27:49 am

No, I did not tried to downgrade my phone. I tried to reinstall its software using Nokia Suite, and the process stopped and my phone went dead. It only shows the word Nokia when I turn it on.
Now I'm trying to recover my phone using this tutorial and I'm using a newer firmware for my model.

He is not talking to you, mate.
i think he was replying to someone else.

Quote from: tmk8532 on October 02, 2013, 08:23:52 am

I believe the filenames are correct. Here is my filelist:

RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256

What is the story with these numbers? Are they on your computer that way?
Take a look at this: http://www.keyables.com/2012/12/fix-phoenix-neither-dp10-nor-dp20-was-found.html

tmk8532 · « **Reply #162 on:** October 03, 2013, 10:40:59 am »

Quote from: matthew on October 02, 2013, 08:43:07 am

He is not talking to you, mate.
i think he was replying to someone else.What is the story with these numbers? Are they on your computer that way?
Take a look at this: http://www.keyables.com/2012/12/fix-phoenix-neither-dp10-nor-dp20-was-found.html

The numbers are the filesizes, so it can help you identify if I got the wrong files, but I don't think so.
My file structure are the same as pointed in your link. Still got the same error message.

rsudhakar · « **Reply #163 on:** October 03, 2013, 08:37:11 pm »

Quote from: matthew on October 02, 2013, 06:24:49 am

Mate, the Phoenix and JAF software specifically state downgrading will kill your phone.
Send it to Nokia.

Yeah. The phone got killed.
Is there any other way to get it alive other than sending it to nokia?
Thanks.

matthew · « **Reply #164 on:** October 04, 2013, 12:25:47 am »

Quote from: rsudhakar on October 03, 2013, 08:37:11 pm

Yeah. The phone got killed.
Is there any other way to get it alive other than sending it to nokia?
Thanks.

1. Pull your battery and hold the power button for about 15 seconds
2. Open Phoenix and select File>Open Product
3. Select RM-495
4. Leave Connections: as NO CONNECTION
5. Select Flashing>Firmware Update
6. Select your product code and choose the NEWEST firmware
7. Check Dead phone USB flashing
8. Press the SW Reset button
9. When prompted, connect your USB cable to the phone and insert the battery
10. Press OK

At this point, Phoenix should do the job.
If not, then you need the tool that connects directly to your phone via the contacts underneath the battery.
There may be other centers to get the phone flashed using the tool than just by Nokia. Try asking at mobile retailers to see if they service phones.

Symbian-Developers

Author Topic: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software (Read 224469 times)

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

rsudhakar

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

rsudhakar

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

tmk8532

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

rsudhakar

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software

matthew

Re: [Tutorial] Nokia dead phone USB flashing with Phoenix Service Software