I have tried to downgrade my nokia 5130c-2 from v07.97 to v07.95 using phoenix.
It said that downgrade is not allowed, I forcibly continued but the process got
failed and my phone got bricked. Phone is totally dead, when i switch on i see
nothing, no light, no vibration.
When I tried again to flash with v07.97 using phoenix, it says
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
When I tried again to flash with v07.97 using JAF,it says
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_x
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_x_red
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
and JAF sometimes says,
JAF version 1.98.62
Detected PKEY: 9000AAC9
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mh
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_CTV_INDIA_HINDI_red
APE Variant file: NONE
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...............................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone failed to boot in flash mode CMT...
When i tried flashing using BB5 Easy Service Tool with the cfw, it said
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
PPM2 : rm495__07.97.ppm_x
CNT : rm495__07.97.image_x_red
CNT3 : rm495__07.97.image_x_red
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 01800115091A7E56A28DFD1186902E11D9EE4604
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Wait for device bootup
-> Bootcode start in CMT fail ! Need flash via programming device
-> Error while flashing...
Phone disconected!
Connect phone on selected interface...
I HAVE NO OTHER WAY TO TRY NOW AND GET MY PHONE ALIVE. PLS HELP ME ON THIS.