Symbian-Developers
Symbian^3, Anna, Belle Forum => Symbian^3 Custom Firmware Discussions => Flashing Tutorials (Updating and Downgrading) => Topic started by: syarmwawa on January 09, 2012, 02:18:39 pm
-
Note : Must be fully charged before you flash FW
1. Remove phone from cable. Make sure it is turned off. If it is neccessary, remove and insert battery.
2. Run Phoenix Service Software as administrator. (Windows Vista, 7: right click -> run as administrator; XP: login with administrator privileges). Select "NO CONNECTION" as connection type.
(http://www.cpkb.org/images/f/fe/Nokia_Phoenix_dead_flashing_01.jpg)
3. Select "Open Product" option in "File" menu.
(http://www.cpkb.org/images/b/bf/Nokia_Phoenix_dead_flashing_02.jpg)
4.A window will appear, select the mobile phone. The product code of the mobile phone is on the sticker under the battery.(Usually RM-xxx)
(http://www.cpkb.org/images/9/91/Nokia_Phoenix_dead_flashing_03.jpg)
5.Select "Firmware Update" option in "Flashing" menu
.
(http://www.cpkb.org/images/c/ca/Nokia_Phoenix_dead_flashing_04.jpg)
6.Press "..." button on the top-right corner of the window to select the language pack / product code You want to flash on phone.
(http://www.cpkb.org/images/4/49/Nokia_Phoenix_dead_flashing_05.jpg)
7. Now select the product code / language pack You want to flash on phone, and press OK button.
(http://www.cpkb.org/images/e/e2/Nokia_Phoenix_dead_flashing_06.jpg)
8.Tick Dead phone USB flashing
.
(http://www.cpkb.org/images/9/91/Nokia_Phoenix_dead_flashing_07.jpg)
9.Then click Options , delete the file shown in red colour like in the picture....and click ok.
.
(http://img835.imageshack.us/img835/4170/003hqc.jpg)
10.At Firmware Update dialog box, choose Phoenix refurbish a dialog box will appear
At this time you click OK in the dialog box, insert the battery and hit "switch on button" for second, as shown below.
(http://img824.imageshack.us/img824/5845/006osv.jpg)
11.Phone firmware update process should start.
(http://www.cpkb.org/images/8/88/Nokia_Phoenix_dead_flashing_10.jpg)
download the latest phoenix from (http://img847.imageshack.us/img847/4893/clickherej.jpg) (http://www.mirrorcreator.com/files/0VBT4MSI/)
-
+100000000000000000000000000000 belle flashed
-
Great guide. Thanks for sharing. :)
-
Great guide. Thanks for sharing. :)
you welcome mate...BTW...have you succes flashing?
-
thank you brother.
you saved me.
:)
-
great tutorial man...appreciated this ;)
-
nokia 5130 still not working so please help me direct through..... team viewer or something..... :)
-
hi maTe,i cant start my phoneix in my com..
they say install a nokia dongle..
where i can find the nokia dongle mate ?
-
Download link is dead. Please update the link with latest version.
-
hi maTe,i cant start my phoneix in my com..
they say install a nokia dongle..
where i can find the nokia dongle mate ?
Remove your antivirus or disable them, and then install Phoenix as some of the files are removed by the antivirus when it's being installed.
_pR
-
Download link is dead. Please update the link with latest version.
Thanks for notifying us. Link will be updated soon.
_pR
-
when i came to the 9th step there is no icon of option in the firmware update dialouge box
-
i am having this problem while flashing , plz any1 solve this fast plz....
flashing failed do you want to retry flashing?
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
-
i am having this problem while flashing , plz any1 solve this fast plz....
flashing failed do you want to retry flashing?
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
Try flashing again in dead mode.
_pR
-
dead mode meas what?
-
dead mode meas what?
Check the 8th step.
_pR
-
yes i have also marked that
-
yes i have also marked that
Follow the procedure. it should work.
_pR
-
hey succeedd to flash my phone, is there any modded cfw for my phone
-
oooh GOD!
after install phoneix software,i try to hack my n8 with norton antivirus frist..
and now my phone DEAD! huff.. :(
i try to connect my phone with USB phone cable,my com cant read that installation (installation failed)..
what should i do mate..
my n8 just 1 month i buy..
hiks..hiks.. :'( :'( :'(,but now i cant use my phone..
so sad :'( :'( :'(
please somebody help! :( :( :( :(
-
This is the message i m getting while flashing
i am having this problem while flashing , plz any1 solve this fast plz....
flashing failed do you want to retry flashing?
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
-
This is the message i m getting while flashing
i am having this problem while flashing , plz any1 solve this fast plz....
flashing failed do you want to retry flashing?
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
keep trying...:) it normal....
-
my phone have same problem like that..
but,real problem my N8 cant on!
i dont understand,after hack with norton antivirus next i wont to flash with phoenix..
but my phone keep cant on,i try press on/off angain and again..
my phone keep cant on..
-
while flashing This is the msg now i m getting kindly help.......
[attachment deleted by admin]
-
and after that this one i m getting.........
is it some problem?......
[attachment deleted by admin]
-
and after that this one i m getting.........
is it some problem?......
keep on trying i too had this. Do a hard reset and try flashing it worked for me if not nokia care is the place.
_pR
-
Hi! I don`t understand section 9.
Must 1.DELETE mmc file, but what about 2.ADD part?
What I must ADD? Must the UDA file change to "BACKUP/REFURB"?
Thank You for good tutorial.
-
oooh GOD!
after install phoneix software,i try to hack my n8 with norton antivirus frist..
and now my phone DEAD! huff.. :(
i try to connect my phone with USB phone cable,my com cant read that installation (installation failed)..
what should i do mate..
my n8 just 1 month i buy..
hiks..hiks.. :'( :'( :'(,but now i cant use my phone..
so sad :'( :'( :'(
please somebody help! :( :( :( :(
Don't worry bro, it's just normal keep trying again you'll be able to flash it. Just follow the steps properly. That's it.
_pR
-
Hi! I don`t understand section 9.
Must 1.DELETE mmc file, but what about 2.ADD part?
What I must ADD? Must the UDA file change to "BACKUP/REFURB"?
Thank You for good tutorial.
Just remove red file that shows up when you click the option button and there is no need to add anything just remove the file and click refurbish and follow the steps in pop up window you'll be able to flash.
_pR
-
Thanks mate :)
-
Thanks. :D It Works!
-
the power belle for c6-01 rm-718 download link is dead ..pls reupload with latest version..
biplab
-
the power belle for c6-01 rm-718 download link is dead ..pls reupload with latest version..
biplab
it's wrong section to post and regarding power belle it'll be made soon, it's work under progress please wait a bit so that bugless firmware Maybe provided
thanks
-
hi ...please help me... when i trying to flash my Nokia 7210 supernova phone...when i click the '...' tab it say that "Neither DP1.0 nor DP2.0 was found for the product, or the product cannot be identified .... what should i do..... please helllp meee.. :'( :(
-
7210 isn't a symbian 3 phone please post in the proper section
-
Am i supposed to connect the phone after i switch it off before initiating step 1 ?
-
Just a lil curious.. Does flashing remove all installed apps and other mods ?
-
yes switch off and connect Then it'll ask for pressing power button if you follow the tutorials
-
There seems to be some sort of problem while flashing.... I find a pop-up msg which tells me that "Neither DP1.0 nor DP2.0 was found for this Product, or the Product cannot be identifies". Any help appreciated... :( :(
[attachment deleted by admin]
-
yes you'd lose everything but you may flash with a cfw too ;)
-
I do not understand... how do i use a custom firmware ?? I mean i'd appreciate if u could be more precise....
-
Did you use Nokia Data Package Manager to download your firmwares?
or have you downloaded only some files and left the rest?
-
That means problem with your firmware files, make sure you downloaded all the needed files and then try again as phoenix is not able to find some required files thus throwing this error.
-
using cfw is just normal download the files and phew flash using them simple isn't ;)
-
hope you like this http://sdf.allstarsoftware.co.uk/symbian3-cfw-release-and-download-board/nokia-c7-(rm-675)609-power-belle-v1-0-with-new-task-bar-and-music-player/msg15541/
-
So this might just mean that i need to re-install the firmware from nokia, is it ??
-
re install? No redownload it and try flashing again. I already linked you to power belle cfw
-
Thanx 4 d help mate.. will let u knw after i'm done...
-
Thanx 4 d help mate.. will let u knw after i'm done...
of course :) happy to help you.
-
i can' download latest phoenix on MF..
File was remove..
Help me mate.. :'(
-
Link updated in first post
Thanks to skullsonfire :)
-
HELP!
I tried downgrading N8 from Belle 111.040.0904 aminkingv9 to scandinavian dg 11.5:
"Loading update server code: 869872 bytes
Update server loaded
Erasing User Data Area...
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x02
-- Error Specifier 0x12
-- Offending Addr 0xFFFFFFFF
-- Expected content 0x0000FFFF
-- Detected content 0xFFFFFFFF
User Data Area erasing failed
Unable to flash phone 0x8401F173
Starting to recover the phone
Recovering phone
Initializing
All operations completed
Product flashing aborted "
???
-
HELP!
I tried downgrading N8 from Belle 111.040.0904 aminkingv9 to scandinavian dg 11.5:
"Loading update server code: 869872 bytes
Update server loaded
Erasing User Data Area...
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x02
-- Error Specifier 0x12
-- Offending Addr 0xFFFFFFFF
-- Expected content 0x0000FFFF
-- Detected content 0xFFFFFFFF
User Data Area erasing failed
Unable to flash phone 0x8401F173
Starting to recover the phone
Recovering phone
Initializing
All operations completed
Product flashing aborted "
???
Try again or it looks like its phoenix error :/
-
Hello,
My Nokia N8 is dead, i am trying to flash the phone. But i am not able to install Pheonix in my laptop. Could somebody please help me out to fix this issue? (I wanted to know if my laptop is not supporting the pheonix app to be installed or issue with the pheonix app)
My Laptop's configuration:-
- Windows 7 Home Premium
- 64 bit OS
Thanks.
-
Restarted and reinstalled NokiaSuie and Phoenix(and FLS!?) and it worked. driver problems i guess.
Thnx!
-
Hello,
My Nokia N8 is dead, i am trying to flash the phone. But i am not able to install Pheonix in my laptop. Could somebody please help me out to fix this issue? (I wanted to know if my laptop is not supporting the pheonix app to be installed or issue with the pheonix app)
My Laptop's configuration:-
- Windows 7 Home Premium
- 64 bit OS
Thanks.
if you've installed any antivirus make sure you disable them while installling phoenix as it deletes some files while installing them.
-
Restarted and reinstalled NokiaSuie and Phoenix(and FLS!?) and it worked. driver problems i guess.
Thnx!
Glad you're issue is solved! :D
-
Hi,
Yes i did that as well (Disabled Anti Virus while installing Pheonix). But still i was getting error message.
-
Hi,
Yes i did that as well (Disabled Anti Virus while installing Pheonix). But still i was getting error message.
can you post the screen shot error.
-
Yeah i tried to do that in my last post! but am not able to attach.. its throwing an error!
-
Yeah i tried to do that in my last post! but am not able to attach.. its throwing an error!
upload in dropbox and post the link. I'll try to help.
-
Here you go!
https://www.dropbox.com/sh/ztcf99hu2wahbc3/ds310XqS6z
-
Here you go!
https://www.dropbox.com/sh/ztcf99hu2wahbc3/ds310XqS6z
looks likes a phoenix error to me. Try downloading the latest version from this link. Hope it solves the problem ;)
www.seidea.com/2012/02/16/phoenix-service-software-2012-04-003-47798-cracked-original/
-
Cool you are write.. its an issue with the software.. From your link i have downloaded the file and installed it. but when i open the application, it says "Install a Nokia dongle and try to start application again". what is it n how can i install nokia dongle ?
-
Cool you are write.. its an issue with the software.. From your link i have downloaded the file and installed it. but when i open the application, it says "Install a Nokia dongle and try to start application again". what is it n how can i install nokia dongle ?
Now it's the antivirus problem. Remove phoenix, disable your antivirus and install it again it should solve it :D
-
hey bro, can i flash my N5230 with cfw by using phoenix method???
-
hey bro, can i flash my N5230 with cfw by using phoenix method???
you can use this method. But j.a.f is easier to flash s60v5 mobiles :)
-
hey bro, ur phoenix soft can run on window xp???
-
agar me phoenix se flash karunga to kya
mjhe core
c0r se c00 rename krna padega
-
Flashing finalization failed. Do you like to retry the finalizing?
HRESULT 0x8421001c (-2078212068)
Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry
what's mean that"??
i cant flash my n8..
-
help..:(:(:(
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001060
BB Asic Index is: 00
Public ID is: 2BE0000439DE0344179C957FE300D880B52E41D2
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0050
Extended device ID: 0000
Revision ID: 0232
Loading update server code: 868592 bytes
Update server loaded
Asic CMT: Start programming 288707 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
All operations completed
Firmware updating failed.
i tired to flash it,what can i do mate..
helpz mee..
-
Just Remove Data Cable n Switch on your phone :)
-
i already do that,but still same..
my phone cant start up (could not start as usual) just nokia and then nokia again..
cant login on homescreen..
so hard now to flash it on original FW :(:(:(
-
are you downgrading your phone?
if "yes" then you just killed your phone..... :)
to make it alive again.... download Pr1.2 through navifirm
flash with that. n then flash with whichever you want to flash.
-
hee :D i dont know mate,before i flash on nokia suite makes to belle..
and then i flash it again with FW 111.030.0610 is succeses! :D:D:D
but now i want flash it to frist FW : 059G6P0 (111.030.0609) it's so hard!
before i flash it on phoenix never say : Verifying communication to product (before flash finalizing)
now it's so hard :(:(:(
if i just kill my phone :D (whats should i do to make it live aGain)
-
Try this
http://sdf.allstarsoftware.co.uk/flashing-tutorials-(updating-and-downgrading)/(tutorial)-downgrade-symbian-belleanna-for-e6-c7-c6-01-x7-n8!/
-
thanks mate!! :D :D :D
i have a 2 news now! :D
bad news and Good news :)
the bad news : so many step downgrading to makes phone back lowest version,is need 2 phoenix software and 14 FW! :(
and then... . .i try to combine that FW what i want to flash!
fiuh!! :D the Good news is : it's works! mate! :D :D :D
i just change thats FW (uda.fpsx),(prd.rofs3.fpsx),(prd.rofs2.fpsx) :D :D :D :D
not changes the RM-596_111.030.0610 i mean it's still that,but my phone like frist time i updgare to belle :D :D :D
when i changes the FW (590G6P0) to product (059C073),it's so bad! the FW product (059C073) when i start up phone,there have texs MOVISTAR!! so ugly! and realy interfere with the view :/
but now his back! :D like a frist my FW product :D
thanks mate! ur awesome! :D
-
thanks mate!! :D :D :D
i have a 2 news now! :D
bad news and Good news :)
the bad news : so many step downgrading to makes phone back lowest version,is need 2 phoenix software and 14 FW! :(
and then... . .i try to combine that FW what i want to flash!
fiuh!! :D the Good news is : it's works! mate! :D :D :D
i just change thats FW (uda.fpsx),(prd.rofs3.fpsx),(prd.rofs2.fpsx) :D :D :D :D
not changes the RM-596_111.030.0610 i mean it's still that,but my phone like frist time i updgare to belle :D :D :D
when i changes the FW (590G6P0) to product (059C073),it's so bad! the FW product (059C073) when i start up phone,there have texs MOVISTAR!! so ugly! and realy interfere with the view :/
but now his back! :D like a frist my FW product :D
thanks mate! ur awesome! :D
can explain it little bit clearer pls, it would be helpful for other users, since i'm having n8 i don't need to go through many step coz of that i'm not able to help some users.
-
how to update nokia 808 pv using Phoenix because nokia 808 does not in the list
-
i hav flashed my 5530 into c6 but nw it is showing problems >:( so plzzzzzz tell me hw to get back my 5530 versions as ovi suite does'nt helping me in this...................
-
i hav flashed my 5530 into c6 but nw it is showing problems >:( so plzzzzzz tell me hw to get back my 5530 versions as ovi suite does'nt helping me in this...................
use JAF.
-
I've flashed and flashed my nokia C7
When It try to boot, it cant.
Just show the NOKIA, and after that it goes off again..
Please help me..
This is the log:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 20F00005DFA40344115B40FE4EEACDAB9480DA9B
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0068
Extended device ID: 0000
Revision ID: 0131
Loading update server code: 868592 bytes
Update server loaded
Asic CMT: Start programming 334827 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Mobile device flashing completed.
Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.
-
hello, i can't flash my n8.
having problem at step no 7.
"cant detect product"
help me..
don't no what 2 do.
-
I tend to flash my Nokia 701 usng Phoenix bt whn i tend to select the product code i get " Neither DP1.0 or DP2.0 was found fr the product or the product cannot be identified " Help me plsssssssssss !!!!
-
I tend to flash my Nokia 701 usng Phoenix bt whn i tend to select the product code i get " Neither DP1.0 or DP2.0 was found fr the product or the product cannot be identified " Help me plsssssssssss !!!!
mate make sure you've all the files and make sure there aren't any number before in the fw files that hav rm number in it
-
can yoo plss elabrate me n detail coz am new n flasin!!! :(
-
can yoo plss elabrate me n detail coz am new n flasin!!! :(
tutorial is detailed already !! Follow it !! :)
-
thnx for this awesome tutorial :)
helped me to flash my 701 once more...
-
can yoo plss elabrate me n detail coz am new n flasin!!! :(
provide the list of file names you're having in the rm folder let me see where you've got the problem.
-
need help i got this problem
i attach a .txt file for the log
[attachment deleted by admin]
-
Hi Mate, Nokia N8 does not have the option to remove the battery..So is it necessary to remove the battery before flashing the process..
-
Hi Mate, Nokia N8 does not have the option to remove the battery..So is it necessary to remove the battery before flashing the process..
i'm not using n8
im using nokia 5800 please help me :'(
-
I tried to flash my N8 Belle 0609 to 1511, I have followed all above steps, I have made sure my phone was off, then I clicked Refurbish after connected it to usb, but it pop-up message asked me to disconnect USB, switch off phone, and reconnect again, after I did all these, it comes up this message as the pic below, anyone can help ?thanks
[attachment deleted by admin]
-
Oh I did it! It works now, thanks
-
my nokia 500 not able to boot up after flashing
-
i m want to downgrade my Nokia N95-8GB from V35.0.001 to V30.0.018?
So can I do it by using Phoenix_2012.
-
My dear i try to flash my nokia N95(dead)...................But showing this message
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
-
what is the product location?
-
nokia 500 is briked i guess...i tried flashing...but it stops at this step...
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Error sending Secondary binary data to Boot Server, 0x8400A814
ERROR: Failed to set phone to flashmode
Starting to recover the phone
Recovering phone
Initializing
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007400C192103032108
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001060
BB Asic Index is: 00
Public ID is: 26100004FFFB3C40D58E2A94997252621EEAED11
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 3AB5DB70B45D23F1ADEEBB5734160706
BB Asic Index is: 00
ROM ID: 2CAC45E23BC33C8B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0050
Extended device ID: 0000
Revision ID: 0232
Loading update server code: 869856 bytes
Update server loaded
Erasing User Data Area...
Asic CMT: Start programming 917481 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
-
waited now this error comes...
Flashing finalization failed. Do you like to retry the finalizing?
HRESULT 0x8421001c (-2078212068)
Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry
-
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007400C192103032108
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001060
BB Asic Index is: 00
Public ID is: 26100004FFFB3C40D58E2A94997252621EEAED11
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 3AB5DB70B45D23F1ADEEBB5734160706
BB Asic Index is: 00
ROM ID: 2CAC45E23BC33C8B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0050
Extended device ID: 0000
Revision ID: 0232
Loading update server code: 869856 bytes
Update server loaded
Erasing User Data Area...
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x02
-- Error Specifier 0x12
-- Offending Addr 0xFFFFFFFF
-- Expected content 0x0000FFFF
-- Detected content 0xFFFFFFFF
User Data Area erasing failed
Unable to flash phone 0x8401F173
Starting to recover the phone
Recovering phone
Initializing
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007400C192103032108
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001060
BB Asic Index is: 00
Public ID is: 26100004FFFB3C40D58E2A94997252621EEAED11
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 3AB5DB70B45D23F1ADEEBB5734160706
BB Asic Index is: 00
ROM ID: 2CAC45E23BC33C8B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0050
Extended device ID: 0000
Revision ID: 0232
Loading update server code: 869856 bytes
Update server loaded
Erasing User Data Area...
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x02
-- Error Specifier 0x12
-- Offending Addr 0xFFFFFFFF
-- Expected content 0x0000FFFF
-- Detected content 0xFFFFFFFF
User Data Area erasing failed
Unable to flash phone 0x8401F173
-
@sarthack use 2011 for flashing older devices and 2012 for newer devices.
-
flashing done nokia 500 is relativly newer...i used sw reset fr flashing nd DONE!
-
Hi, following steps provided in this thread (Nokia dead phone USB flashing with Phoenix Service Software), I got my phone killed ???
Using Phoenix Service Software 2011.14.004.45945 and navifirmplus 1.7, I get latest firmware (RM-609_025.008_234.02) for my E6-00 (RM-609) and following steps here, I tried to flash my phone. But sadly, I got some error in middle of process and now my phone is dead :(
My phone info before flashing:
Symbian Anna Ver 021.014, Date: 2011-05-26
Custom ver: 021.014.234.01
Lang: 021.014.28.01
Product code 059H136
Model e6-00
Type rm-609
Flash log:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 2140010DDDD80344034B5896115AAE46A2EEAE79
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 812840 bytes
Update server loaded
Asic CMT: Start programming 172574 KB...
Asic CMT: Programming data sent: 0%
Error sending programming command 0x8400A814
ERROR Sending status request to Algo! 0x8400A814
Error while programming CMT!
Starting to recover the phone
Recovering phone
Initializing
Error when flashing Algo (0x84012283)
Unable to flash phone 0x84012283
Scanning image files...
Waiting for USB device...
-
Hi, following steps provided in this thread (Nokia dead phone USB flashing with Phoenix Service Software), I got my phone killed ???
I think you tried to downgrade, were you on belle or anna when you tried to flash ur mobile..??
-
I think you tried to downgrade, were you on belle or anna when you tried to flash ur mobile..??
I'm kinda new in symbian flashing process, but I don't think that's the case, my phone os was Symbian Anna Ver 021.014, Date: 2011-05-26, and I tried to flash with 025.008. but again, I'm new here, so maybe there is something that I can't see.
please, if you have any suggestions, I'll be glade to try it out.
-
I'm kinda new in symbian flashing process, but I don't think that's the case, my phone os was Symbian Anna Ver 021.014, Date: 2011-05-26, and I tried to flash with 025.008. but again, I'm new here, so maybe there is something that I can't see.
please, if you have any suggestions, I'll be glade to try it out.
No need to worry, keep trying again. Btw which phoenix are u using, use 2011 if you're using 2012. Cause, i too had problem in 2012 and i was able to flash without any issues using 2011 version.
-
I first tried phoenix 2012 on my win 7 64bit, but that that not even started. so i uninstalled it and installed phoenix 2011. I've been trying it for almost 2 days now. but it always result the same error.
-
I first tried phoenix 2012 on my win 7 64bit, but that that not even started. so i uninstalled it and installed phoenix 2011. I've been trying it for almost 2 days now. but it always result the same error.
Ok, i think it might be the drivers problem. First remove the nokia suite and phoenix. Then install the latest nokia suite and now don't install phoenix. Connect your mobile to pc. Some drivers should be installed. After it is installed install phoenix 2011 and try flashing it should solve. GL.
-
Ok, i think it might be the drivers problem. First remove the nokia suite and phoenix. Then install the latest nokia suite and now don't install phoenix. Connect your mobile to pc. Some drivers should be installed. After it is installed install phoenix 2011 and try flashing it should solve. GL.
I uninstalled all programs that had nokia as it's publisher, including nokia suite and phoenix, installed nokia suite first and connected my *dead* phone to computer, after auto installation of some drivers, I installed Phoenix-Service-Software-2011.14.004.45945, and followed steps in this tutorial. But still I got same error :(
Am I doing something wrong here?
In flashing process, I keep my usb cable disconnected from phone, but connected to pc, and meanwhile I have removed phone's battery, when pressing refurbish button, I click ok on displayed dialogue box and then connect usb to phone and insert battery back and press phone's power switch for a sec.
-
I uninstalled all programs that had nokia as it's publisher, including nokia suite and phoenix, installed nokia suite first and connected my *dead* phone to computer, after auto installation of some drivers, I installed Phoenix-Service-Software-2011.14.004.45945, and followed steps in this tutorial. But still I got same error :(
Am I doing something wrong here?
In flashing process, I keep my usb cable disconnected from phone, but connected to pc, and meanwhile I have removed phone's battery, when pressing refurbish button, I click ok on displayed dialogue box and then connect usb to phone and insert battery back and press phone's power switch for a sec.
:/ try different ports or with a different pc. If the problem is still there i guess nokia store is only the place.
-
:/ try different ports or with a different pc. If the problem is still there i guess nokia store is only the place.
trying another USB port did the trick. tnx,
but at the end of process, there was some errors, but after restarting my phone, it's version has been changed to the version that I was trying to install. Honestly I don't know if it was a successful flashing, cause lock code hasn't changed to default '12345'.
Here is log:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 2140010DDDD80344034B5896115AAE46A2EEAE79
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 812840 bytes
Update server loaded
Asic CMT: Start programming 172574 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Starting to recover the phone
Recovering phone
Initializing
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted
-
trying another USB port did the trick. tnx,
but at the end of process, there was some errors, but after restarting my phone, it's version has been changed to the version that I was trying to install. Honestly I don't know if it was a successful flashing, cause lock code hasn't changed to default '12345'.
Good, try again a dead flash it should fine. if not do a hard reset after the flashing is done and everything should be fine.
-
OK Trting to flash a E51 (RM-244) Successfully flashing in dead mode no problem. My problem is trying to find a rom that allows ant SIM (Unlocked version) Have tried many from Nokia. Does anyone have an unlocked version please?
-
OK Trting to flash a E51 (RM-244) Successfully flashing in dead mode no problem. My problem is trying to find a rom that allows ant SIM (Unlocked version) Have tried many from Nokia. Does anyone have an unlocked version please?
You can't unlock a phone by simply flashing...
-
OK Thanks for the advice.
Any suggestions on how I might unlock it then please?
-
installed it worked fine..but cant flash..after flashing a screen appears flashing couldnt be completed retry..
i disconnected the phone jst chk mobile booted up...everything is fine but i cant open any app..an error comes feature not supported...
[attachment deleted by admin]
-
installed it worked fine..but cant flash..after flashing a screen appears flashing couldnt be completed retry..
i disconnected the phone jst chk mobile booted up...everything is fine but i cant open any app..an error comes feature not supported...
Flash once again.
after that do one thing, remove USB, Battery.
then put Battery again IN n then restart.
-
Flash once again.
after that do one thing, remove USB, Battery.
then put Battery again IN n then restart.
@pranil i did the same...then the error comes when i try to open music player/videos etcetc....homescreen doesnt support this..
-
ay kudos to all the bold and clear instructions. first time doing this and sadly it did not work, i really need some help coz i have followed every instruction down to the punctuations. all the way from downloading via navifirm to using phoenix. i have a nokia c7 rm691
-
Hi,
I have a dead Nokia C5-00 (RM-645) which I am trying to flash using Phoenix version and end up with this error:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
I am performing these steps from windows 7 64 bit virtual machine running under VMWare Fusion 5.0 in my Macbook Pro running Mountain Lion OS (10.8.2)
Is flashing from a VM supported?
-
no i dont think so..,
-
Hi,
I have a dead Nokia C5-00 (RM-645) which I am trying to flash using Phoenix version and end up with this error:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
I am performing these steps from windows 7 64 bit virtual machine running under VMWare Fusion 5.0 in my Macbook Pro running Mountain Lion OS (10.8.2)
Is flashing from a VM supported?
You will need to run windows, the emulator prob doesn't support the drivers
-
Thanks Friends. Let me try with a windows machine and update the thread.
-
Hello,
Yes again you are right! its the antivirus who blocked me from using Phoenix.
However i tried to flash my phone. but am getting below error and tried more than 3 times always i get same error.
----------------
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
----------------
OS : Windows 7 64 bit (Home Premium)
As i mentioned in my post, My Nokia N8 is totally dead, when i connect charger the red light above usb cable doesn't light-up, maybe thats why its not able to boot rom ??
If anybody else facing similar issue please advice on how to proceed further.
-
I need help to flash my nokia n95 with the latest firmware. Please help with the software i need and where to get them. Thank you.
Contact me on muropa.tg@hotmail.com
Thanx in advance.
-
hi frnd.....i have nokia 701 belle fp2 nt dead...i wnt to flash it wid cfw....whr to put cfw files while flashing??coz m gettng an error'unable to load file'(that cfw file lyk core,rofs2,rofs3,uda)...
plz help...m waitng for reply...
-
hi frnd.....i have nokia 701 belle fp2 nt dead...i wnt to flash it wid cfw....whr to put cfw files while flashing??coz m gettng an error'unable to load file'(that cfw file lyk core,rofs2,rofs3,uda)...
plz help...m waitng for reply...
Program Files\Nokia\Phoenix\Products\RM-***
Or Try JAF Brotha.. ;)
-
thanx to syarmwawa for this tutorial :)
finally i flashed c6-01.Its first time that i have ever flashed a phone :D
Thanx again
-
Hello, i have a small problem here, let me show you what kinda of error i get, but im follow wing step by step, 100% sure that im doing all right. Phone Nokia 5800 xpressmusic, rm-356, 0559233, i downloaded balti version but i have tried other versions and i get the same result. (http://s13.postimage.org/9g3jextzn/Error.jpg) (http://postimage.org/image/9g3jextzn/)
-
I need help flashing my 808PV, after Phoenix completes the programming the phone shows the Nokia logo but cannot boot up and restarts in a loop cycle until it turns off itself in 1 min. What I'm doing wrong?
-
i have a problem with my Nokia C2-01. When i plug it into my PC, i'm hearing the plug in sound and after 5 second the plug out sound. after this my display starts to flash three times with a period of 5 seconds between. Can you tell me why? Is there anything i can do? I don't want to lose it
-
what to do when my phone type (RM-807) is not even listed...??? I have not flashed it as yet but I'd like to anytime...
[attachment deleted by admin]
-
this tutorial helps me everytime when I get stuck in flashing my 701.... thank you for an excellent tutorial....
-
Hi every body, Pls help me to solve my prob....
My Nokia C6-01 was dead and had the common boot failure problem.(shows NOKIA screen) I was trying to flash it with Phoenix s/w . phone model RM-718 / 059C1D3.
s/w version used was 111.040.1511_021. After several unsuccessful attempts a successful message was received . it given below
---------------------------------------------------------------
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 21300111BADC0344FC1ED5532291D930C830E852
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 868592 bytes
Update server loaded
Asic CMT: Start programming 405277 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Stay In Flash Mode option was set, skipping Finalize
All operations completed
Firmware updating succeeded.
-----------------------------------------------------------------------
But still my phone does not bootup. prob remains same. Is it a defect / error with flash IC / mother board. Pls advice me to proceed .
Thank you all in advance...
-
Do I need to start the phone and press OK at the same time or press ok after nokia boot animation starts ?
-
Thanks Man, Great Job
-
Please help. I followed every step but as the flashing begins, I turn on the phone (Nokia E63), and as I click OK on the popup my PC gives me a Blue Screen of Death. Has anyone else experienced the same issue?
-
Ok guys so the following thing happens : when I try to flash , i keep the power button pressed until it vibrates 3 times , then i connect the usb cable , and then windows loses the connection with the phone ( i guess the phone dies again ) . I did all that in dead mode flashing , but after the flashing is paused until i redo those steps ( annoying ) the nokia logo stays on the screen for about a minute and dies again .. what can i do ? the phone died 3 weeks ago and just now i thouhgt about flashing.... help ??
-
Hello all!
I'm trying to recover my N95 (rm-159) without success with Phoenix. I do all the steps mentioned in this tutorial, but I always receive this error:
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
Any solutions?
Thanks in advance
-
Please help. I followed every step but as the flashing begins, I turn on the phone (Nokia E63), and as I click OK on the popup my PC gives me a Blue Screen of Death. Has anyone else experienced the same issue?
It might help to include as much information as possible when asking for specific help.
What are your operating environment variables (OS, software version [of Phoenix], do you have multiple versions installed on your computer, have you disabled ALL antivirus programs, etc.)?
-
Hello all!
I'm trying to recover my N95 (rm-159) without success with Phoenix. I do all the steps mentioned in this tutorial, but I always receive this error:
HRESULT 0x8401F141 (-2080247487)
flash:boot rome was not detected after boot up. unable to start flashing.
Any solutions?
Thanks in advance
Try another USB port. Phoenix likes the front auxiliary port on this computer. Good ol' USB5 :)
-
Ok guys so the following thing happens : when I try to flash , i keep the power button pressed until it vibrates 3 times , then i connect the usb cable , and then windows loses the connection with the phone ( i guess the phone dies again ) . I did all that in dead mode flashing , but after the flashing is paused until i redo those steps ( annoying ) the nokia logo stays on the screen for about a minute and dies again .. what can i do ? the phone died 3 weeks ago and just now i thouhgt about flashing.... help ??
Try removing the battery (two torx screws on the side of the phone, a plastic tab and you can pull the battery out) and begin the dead flash with the battery out. When the dialog box comes on, insert the battery and click OK.
-
Try another USB port. Phoenix likes the front auxiliary port on this computer. Good ol' USB5 :)
I tried the front and back USB ports from my PC and from a old notebook. No sucess at all.
-
I tried the front and back USB ports from my PC and from a old notebook. No sucess at all.
Did you make sure ALL anti-virus programs were off? The GUI program is not enough - you have to kill the engines, as well.
-
Hmm. I've never had any problems with my AV software, but I'll try to disable it and try again. Then I post the results.
-
Hmm. I've never had any problems with my AV software, but I'll try to disable it and try again. Then I post the results.
Until i started manually killing running security software (MsMpEng.exe and Msseces.exe which make Microsoft Security Essentials) from the Task Manager (Ctrl+Alt+Del), i had all kinds of inconsistent and bug-filled flashing results. Seriously; weird results.
Now, the flashing is going much more smoothly (if only the mods would not brick the phone i would be set!)
-
Until i started manually killing running security software (MsMpEng.exe and Msseces.exe which make Microsoft Security Essentials) from the Task Manager (Ctrl+Alt+Del), i had all kinds of inconsistent and bug-filled flashing results. Seriously; weird results.
Now, the flashing is going much more smoothly (if only the mods would not brick the phone i would be set!)
Ok. I'll try to kill these ones too. But anyway, I did a test just killing the antivir. Here is what happened:
I stopped all antivirus software and processes and repeated the steps explained in this thread tutorial:
-> Open Phoenix
-> Connections: NO CONNECTION
-> Open product (in my case RM-159)
-> Flashing -> Firmware Update
-> Select the product code for update (SW 35.0.002 Variant 001 Product Code:0546222)
-> Select Dead phone USB flashing
-> Refurbish
Then I follow the on screen instructions and when I power on
the phone, Phoenix crash and exit.
But If I ignore that error message (not clicking Ok), Phoenix keeps
running, but the flashing fails with this error:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
And this is the output of Firmware Update:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
But If I leave the phone connected to PC, and open Phoenix again, then appears a connection to select, in my case, "USB3 - Product in flash mode". When I select that connection the status bar shows "Ready" and the icon on the left shows a connected status at USB3.
Then I do:
-> Open product (in my case RM-159)
-> Flashing -> Firmware Update
It automatically selected my original product code, which is
SW 30.0.015 Variant 007 Product Code 0549028.
The "Dead phone USB flashing" is greyed out. I click on "Update Software" and get this error:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x84210027 (-2078212057)
Firmware: Firmware updating failed. Error 0x8401227A - Flash: Phone reported that it does not allow to flash SW becasue it is older than existing.
And this is the Firmware Update output:
Flashing started
Creating product data items list
Product data items list created
Backing up data items
Backing up data items
Getting Data Package
Reading product state
Initializing datafile
DataItem "ProductProfile" version "1.1" set to defaults, skipping backup
Backup/restore result: 0 out of 1 items were not backed up
Backup complete
Flashing phone
Initializing
Verifying communication to device...
Asic CMT: Verifying communication to device...
Scanning image files...
Error ADL Loader: Phone reported Downgrade not possible. Flash a newer SW version
Protocol 2: Error during Negotiation. Unable to flash.
Unable to flash phone 0x8401227A
Starting to recover the phone
Recovering phone
Initializing
Cannot perform recover from error: 0x8401227A, ADL_LDR_DOWNGRADE_NOT_POSSIBLE_ERROR
ERROR: Unable to recover the product
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Firmware updating failed.
Then I choose a newer product code (SW 35.0.002 Variant 001 Product Code:0546222) and click on "Update Software" and get this error again:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x84210027 (-2078212057)
Firmware: Firmware updating failed. Error 0x8401227A - Flash: Phone reported that it does not allow to flash SW becasue it is older than existing.
And the Firmware Update output:
Flashing started
Creating product data items list
Product data items list created
Backing up data items
Backing up data items
Getting Data Package
Reading product state
Initializing datafile
Backup/restore result: 0 out of 0 items were not backed up
Backup complete
Flashing phone
Initializing
Verifying communication to device...
Asic CMT: Verifying communication to device...
Scanning image files...
Error ADL Loader: Phone reported Downgrade not possible. Flash a newer SW version
Protocol 2: Error during Negotiation. Unable to flash.
Unable to flash phone 0x8401227A
Starting to recover the phone
Recovering phone
Initializing
Cannot perform recover from error: 0x8401227A, ADL_LDR_DOWNGRADE_NOT_POSSIBLE_ERROR
ERROR: Unable to recover the product
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Firmware updating failed.
Its the same thing if I click on "Refurbish". Its strange because its a newer software version. I'm using Phoenix v2014.04.003.47798.
Any help?
-
Ok. I'll try to kill these ones too. But anyway, I did a test just killing the antivir. Here is what happened:
...
Any help?
Mate;
1. Use Software Reset instead of Refurbish
2. Do not turn on the phone. Instead, remove the battery and click Update Software and a dialog box will appear. At this point, insert the battery and click the Ok button to proceed
Maybe try also:
Disable automatic selection and manually select the FW you want to use
Uninstall your Phoenix and install 2012.50. S60 OS9x seems to like v2012.50.
-
Mate;
1. Use Software Reset instead of Refurbish
2. Do not turn on the phone. Instead, remove the battery and click Update Software and a dialog box will appear. At this point, insert the battery and click the Ok button to proceed
Maybe try also:
Disable automatic selection and manually select the FW you want to use
Uninstall your Phoenix and install 2012.50. S60 OS9x seems to like v2012.50.
Ok. Thanks for the info. I'll try it and post the results when done.
-
Mate;
1. Use Software Reset instead of Refurbish
2. Do not turn on the phone. Instead, remove the battery and click Update Software and a dialog box will appear. At this point, insert the battery and click the Ok button to proceed
Maybe try also:
Disable automatic selection and manually select the FW you want to use
Uninstall your Phoenix and install 2012.50. S60 OS9x seems to like v2012.50.
I installed the version you told me and followed your instructions without success. I get the same error as before.
I'm losing hope of getting my phone back to life. :(
-
I installed the version you told me and followed your instructions without success. I get the same error as before.
I'm losing hope of getting my phone back to life. :(
There will be no giving up here, mate. what is the absolute path of the directory where you are placing your FW files? Where did you get your files and please list all the files you are using to flash.
-
There will be no giving up here, mate. what is the absolute path of the directory where you are placing your FW files? Where did you get your files and please list all the files you are using to flash.
I'm using a notebook with Windows 7. Phoenix is installed on :
C:\Program Files\Nokia\Phoenix
All the FW files are on:
C:\Program Files\Nokia\Phoenix\Products\rm-159
I'm no sure from where I got the FW files, because I was searching through many Symbian related sites and most of the links were dead. But the files which I downloaded installed without errors and no viruses. I downloaded a file named RM-159_LTA_35.0.002_v8.0_N95.exe and copied my original FW files (v 30.0.015) from Nokia Suite folder on my computer.
This is the list of the files on RM-159 folder. I'm not sure what files are used on the flash update, since Phoenix select them automatically based on my choice of FW version.
lblprint DIR
RM159_0534862_35.0.002_001 DIR
RM159_0546222_35.0.002_001 DIR
RM159_0549028_30.0.015_007 DIR
adcreadings.ini 587
bluetooth.ini 218
camera_control.ini 980
readme_basic.txt 2558
RM159_30.0.015_037_U01_nsu_uda.fpsx 29234123
RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0534862_35.0.002_001.dcp 15594
RM159_0534862_35.0.002_001.vpl 3693
RM159_0534862_35.0.002_001_signature.bin 797
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM159_0549028_30.0.015_007.dcp 10823
RM159_0549028_30.0.015_007.vpl 4192
RM159_0549028_30.0.015_007_signature.bin 3970
RM159_0557241_35.0.002_001.dcp 15588
RM159_0557241_35.0.002_001.vpl 3684
RM159_0557241_35.0.002_001_signature.bin 797
RM-159_30.0.015_PR.C0R 73756260
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256
rm_159_als.ini 1443
V1RM-159_30.0.015_PR.vB1 12721989
-
Mate, your file situation is a mess ???
If those are exactly as they exist on your computer, you would have to rename them to their proper designations (delete the numbers after the files extensions).
You should have six files that more or less are named like these:
Rm-1XX_XX.X.XXX_Pr.c0r
Rm-1XX_XX.X.XXX_Pr.v24
Rm-1XX_XX.X.XXX_Xxx_U06_Uda.fpsx
Rm-1XX_xxxxxxx_XX.X.XXX_001.dcp
Rm-1XX_xxxxxxx_XX.X.XXX_001_Signature.bin
Rm-1XX_xxxxxxx_XX.X.XXX_001.vpl
You said you are in South America, right? What is the model number (RM) under your battery? If you are using a NAM phone (which is RM-160) you should be flashing the SW v35.2.1
You can get the RM-160 files here http://www.mrcrab.net/nokia/Nokia_N95.html?productType=RM-160&releaseID=2493588875&version=35.2.1
RM-159 is here http://www.mrcrab.net/nokia/Nokia_N95.html?productType=RM-159&releaseID=2646703126&version=35.0.2
i would try changing the file names if that is how they are on your computer, though.
-
Hello again,
Sorry about the delay to answer. I had tons of work to do with a tight deadline....
Anyway, I removed all the files from my note. Did a fresh install of Phoenix.
My phone is RM-159. I downloaded all the files for this model from the site you post the links and placed them on C:\Program Files\Nokia\Phoenix\Products\RM-159.
But now, when I click on "Firmware Update" I receive this message:
"Neither DP1.0 nor DP2.0 was found for the Product, or the Product cannot be identified."
-
Did you correct the file names? They have to be named like the download links except spaces have to be underscores (ie RM-159_35.0.002_pr.c0r). Also, all my flashing files are in C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\Rm-159\
-
are you downgrading your phone?
if "yes" then you just killed your phone..... :)
to make it alive again.... download Pr1.2 through navifirm
flash with that. n then flash with whichever you want to flash.
HOW WILL I DOWNLOAD PR1.2 THROUGH NAVIFIRM?
WHAT DOES PR1.2 MEAN??
-
I have tried to downgrade my nokia 5130c-2 from v07.97 to v07.95 using phoenix.
It said that downgrade is not allowed, I forcibly continued but the process got
failed and my phone got bricked. Phone is totally dead, when i switch on i see
nothing, no light, no vibration.
When I tried again to flash with v07.97 using phoenix, it says
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
When I tried again to flash with v07.97 using JAF,it says
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_x
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_x_red
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
and JAF sometimes says,
JAF version 1.98.62
Detected PKEY: 9000AAC9
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Searching for default location of ini...
Checking path: \Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-495\
Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mh
CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_CTV_INDIA_HINDI_red
APE Variant file: NONE
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...............................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone failed to boot in flash mode CMT...
When i tried flashing using BB5 Easy Service Tool with the cfw, it said
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
PPM2 : rm495__07.97.ppm_x
CNT : rm495__07.97.image_x_red
CNT3 : rm495__07.97.image_x_red
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 01800115091A7E56A28DFD1186902E11D9EE4604
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Wait for device bootup
-> Bootcode start in CMT fail ! Need flash via programming device :(
-> Error while flashing... :(
Phone disconected!
Connect phone on selected interface...
I HAVE NO OTHER WAY TO TRY NOW AND GET MY PHONE ALIVE. PLS HELP ME ON THIS.
-
I have tried to downgrade my nokia 5130c-2 from v07.97 to v07.95 using phoenix.
It said that downgrade is not allowed, I forcibly continued but the process got
failed and my phone got bricked. Phone is totally dead, when i switch on i see
nothing, no light, no vibration.
...
I HAVE NO OTHER WAY TO TRY NOW AND GET MY PHONE ALIVE. PLS HELP ME ON THIS.
Mate, the Phoenix and JAF software specifically state downgrading will kill your phone.
Send it to Nokia.
-
Did you correct the file names? They have to be named like the download links except spaces have to be underscores (ie RM-159_35.0.002_pr.c0r). Also, all my flashing files are in C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\Rm-159\
I believe the filenames are correct. Here is my filelist:
RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256
Maybe something else is missing. When I installed the installer package with the firmware I mentioned before, Phoenix did not complain about nothing, but cant flash my phone.
I tried to put those files on the folder you said, but the result is the same.
-
are you downgrading your phone?
if "yes" then you just killed your phone..... :)
to make it alive again.... download Pr1.2 through navifirm
flash with that. n then flash with whichever you want to flash.
HOW WILL I DOWNLOAD PR1.2 THROUGH NAVIFIRM?
WHAT DOES PR1.2 MEAN??
No, I did not tried to downgrade my phone. I tried to reinstall its software using Nokia Suite, and the process stopped and my phone went dead. It only shows the word Nokia when I turn it on.
Now I'm trying to recover my phone using this tutorial and I'm using a newer firmware for my model.
-
No, I did not tried to downgrade my phone. I tried to reinstall its software using Nokia Suite, and the process stopped and my phone went dead. It only shows the word Nokia when I turn it on.
Now I'm trying to recover my phone using this tutorial and I'm using a newer firmware for my model.
He is not talking to you, mate.
i think he was replying to someone else.
I believe the filenames are correct. Here is my filelist:
RM159_31.0.002_039_U01_uda.fpsx 49751623
RM159_0546222_35.0.002_001.dcp 15593
RM159_0546222_35.0.002_001.vpl 3690
RM159_0546222_35.0.002_001_signature.bin 797
RM-159_35.0.002_PR.C0R 73710930
RM-159_35.0.002_PR.v19 12656256
What is the story with these numbers? Are they on your computer that way?
Take a look at this: http://www.keyables.com/2012/12/fix-phoenix-neither-dp10-nor-dp20-was-found.html
-
He is not talking to you, mate.
i think he was replying to someone else.What is the story with these numbers? Are they on your computer that way?
Take a look at this: http://www.keyables.com/2012/12/fix-phoenix-neither-dp10-nor-dp20-was-found.html
The numbers are the filesizes, so it can help you identify if I got the wrong files, but I don't think so.
My file structure are the same as pointed in your link. Still got the same error message.
-
Mate, the Phoenix and JAF software specifically state downgrading will kill your phone.
Send it to Nokia.
Yeah. The phone got killed.
Is there any other way to get it alive other than sending it to nokia?
Thanks.
-
Yeah. The phone got killed.
Is there any other way to get it alive other than sending it to nokia?
Thanks.
1. Pull your battery and hold the power button for about 15 seconds
2. Open Phoenix and select File>Open Product
3. Select RM-495
4. Leave Connections: as NO CONNECTION
5. Select Flashing>Firmware Update
6. Select your product code and choose the NEWEST firmware
7. Check Dead phone USB flashing
8. Press the SW Reset button
9. When prompted, connect your USB cable to the phone and insert the battery
10. Press OK
At this point, Phoenix should do the job.
If not, then you need the tool that connects directly to your phone via the contacts underneath the battery.
There may be other centers to get the phone flashed using the tool than just by Nokia. Try asking at mobile retailers to see if they service phones.
-
The numbers are the filesizes, so it can help you identify if I got the wrong files, but I don't think so.
My file structure are the same as pointed in your link. Still got the same error message.
You are using 32-bit Windows or 64?
-
You are using 32-bit Windows or 64?
32-bit Windows 7 Ultimate Service Pack 1
-
Okay.
Try installing Nokia Care Suite, if you do not already have it : http://www.softpedia.com/dyn-postdownload.php?p=227052&t=4&i=1
Go to C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Suite\NOSSU2\variants\Production External\Products\
Is there a folder rm-159 there?
If so, move this rm-159 folder to C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\ and delete the one in the Phoenix directory
If not, move your rm-159 folder to that location
We want only one instance of firmware, basically
Then try Phoenix again
-
Okay.
Try installing Nokia Care Suite, if you do not already have it : http://www.softpedia.com/dyn-postdownload.php?p=227052&t=4&i=1
Go to C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Suite\NOSSU2\variants\Production External\Products\
Is there a folder rm-159 there?
If so, move this rm-159 folder to C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\ and delete the one in the Phoenix directory
If not, move your rm-159 folder to that location
We want only one instance of firmware, basically
Then try Phoenix again
Well, I guess that Windows 7 puts things in different folders. My file structure is different from what you have told me. Anyway, I found the correct folder and Nokia Care does not have a RM-159 folder, but I move my folder to C:\Program Data\Nokia\Packages\Products, and then Phoenix did find my firmware.
But still no success to flash my phone. This time I got this error:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
And on Phoenix status windows this one:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
-
1. Pull your battery and hold the power button for about 15 seconds
2. Open Phoenix and select File>Open Product
3. Select RM-159
4. Leave Connections: as NO CONNECTION
5. Select Flashing>Firmware Update
6. Select your product code and choose the 35.002 firmware
7. Check Dead phone USB flashing
8. Press the SW Reset button
9. When prompted, connect your USB cable to the phone and insert the battery
10. Press OK
At this point, Phoenix should do the job.
Is this the procedure you are following?
i have had Phoenix spit error messages at me multiple times in a row.
You just have to close the program and try it again. It eventually works.
-
Almost the same process. I haven't done step 1 and in step 8 I did "Refurbish" instead of "SW Reset".
Anyway, no luck with the sequence you told too. Phoenix crashes when I press power on phone. Yesterday, the process failed, but Phoenix did not crashed.
-
Almost the same process. I haven't done step 1 and in step 8 I did "Refurbish" instead of "SW Reset".
Anyway, no luck with the sequence you told too. Phoenix crashes when I press power on phone. Yesterday, the process failed, but Phoenix did not crashed.
Mate one step different is not the same process at all
At no point in a dead flash do you power on the phone. Try it exactly as described
1. Pull your battery and hold the power button for about 15 seconds
2. Open Phoenix and select File>Open Product
3. Select RM-159
4. Leave Connections: as NO CONNECTION
5. Select Flashing>Firmware Update
6. Select your product code and choose the 35.002 firmware
7. Check Dead phone USB flashing
8. Press the SW Reset button
9. When prompted, connect your USB cable to the phone and insert the battery
10. Press OK
-
Hi all
My phone is a Nokia E7-00
flashing fails at 90%
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 1070010B7ADB0344EEF5A97DE099CB68A0087759
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 869872 bytes
Update server loaded
Asic CMT: Start programming 171301 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x01
-- Error Specifier 0x06
-- Offending Addr 0x0B080000
-- Expected content 0x0000FEEB
-- Detected content 0x0000FFFF
Error sending programming command 0x8400A814
ERROR Sending status request to Algo! 0x8400A814
Error while programming CMT!
Error when flashing Algo (0x84012283)
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for communication response: 2
Waiting for communication response: 1
ERROR: Unable to detect device 0x8401F121. Check USB connection
Waiting for USB device...
Boot rom detected. Continuing flashing...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001040
BB Asic Index is: 00
EM Asic ID is: 00001030
BB Asic Index is: 00
Public ID is: 1070010B7ADB0344EEF5A97DE099CB68A0087759
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0068
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 869872 bytes
Update server loaded
UPS flashed and initialized. Continuing flashing...
Asic CMT: Start programming 171301 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
FUR: ALGO reported error in Control Frame. Unable to continue.
ERROR: Programming error reported for asic CMT
-- Error Type 0x01
-- Error Specifier 0x06
-- Offending Addr 0x0B080000
-- Expected content 0x0000FEEB
-- Detected content 0x0000FFFF
Error sending programming command 0x8400A814
ERROR Sending status request to Algo! 0x8400A814
Error while programming CMT!
Error when flashing Algo (0x84012283)
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Product recovery failed
Please assist.
-
Mate one step different is not the same process at all
At no point in a dead flash do you power on the phone. Try it exactly as described
Last time I did exactly as you described, but without any success. Sorry if my last post made this unclear. I followed your instructions to the letter and still got this error on Phoenix:
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
-
Almost the same process... Phoenix crashes when I press power on phone.
Where do i write to press anything on the phone, mate?
You never power on the phone.
-
Where do i write to press anything on the phone, mate?
You never power on the phone.
Sorry. I was following Phoenix on screen instructions too. I tried again this time, but without powering the phone and got the same error as before.
-
Sorry. I was following Phoenix on screen instructions too. I tried again this time, but without powering the phone and got the same error as before.
Hey, i have a question:
If you uninstall Phoenix and the FUSE flashing cable drivers, then reinstall and connect your phone (with the battery in it), does your PC install the drivers for it?
Please try this and see if the computer installs its drivers correctly...
-
Hey, i have a question:
If you uninstall Phoenix and the FUSE flashing cable drivers, then reinstall and connect your phone (with the battery in it), does your PC install the drivers for it?
Please try this and see if the computer installs its drivers correctly...
I uninstalled all Nokia software and installed again. I put the battery into the phone and connect it to PC. With the phone off, nothing happens. When I turn on the phone (it goes to the white screen with Nokia written on it), then Windows installs the drivers without any problems.
The drivers installed are Nokia BB5 ADL Loader USB Phone Parent and Nokia BB5 ADL Loader USB Generic.
-
Okay, did you give flashing another go?
-
Okay, did you give flashing another go?
Yes, I did. Followed your instructions precisely. Same error as before.
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
and the output on the Firmware Update window
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
One doubt: You said I should not turn on the phone...but the drivers you asked in your previous post, only installed when I powered on the phone. Why I should not turn the phone on when flashing?
-
Dead flashing issues different commands to the phone.
If the phone is on, a different process is used to initialize the flashing procedure. In a dead flash, you are able to flash firmware that the phone would not otherwise accept by bypassing authorizations.
i hate to be the bearer of unpleasant news, but your error messages are indicative of you making a mistake somewhere; either in technique or file placement, availability or nomination.
Double, triple, quadruple and quintuple-check EVERY single file. Compare all screenshots for clues as to Win7-specific procedure and read the entire thread of all Phoenix tutorial posts to find out where you are going wrong.
Basically, start from square one and forget what you think you already know. You have already indicated you have misread and done it your own way, mate. Phoenix glitches a bit sometimes, but if you follow proper protocol, it will flash the phone.
-
Well, I'll try again but I really don't know where this mistake could be. The firmware files and the flashing instructions are the ones you posted. In my previous post I followed your instructions step by step. If I have any different result I'll post it... :(
-
My instructions are only the flash; there is more to it than that. The error messages you are getting are related to issues with your files for flashing. You have to make certain you have all the right files in the right place and no other sets of files floating around on your computer. If there are incomplete sets or broken files, Phoenix will not be happy.
Find a few tutorials for Phoenix (there are many) and study them for clues; maybe you are missing something reeeeally simple or maybe you are missing just one important step.
i have run into the same errors you have in my experience, so i know that they are from making an error, not because Phoenix or the phone are broken.
-
Like I said before... I'll try.
-
After verifying all files and that there is only one set; here is a note for your preparation: when changing versions of Phoenix, the way my flashing cable drivers get installed is this (and please note that i am only giving the required steps one by one - no jumping ahead or assuming):
1. Open Phoenix
2. File menu > Open Product
3. Flashing menu > Firmware Update
4. Product Code menu > ... (select product code)
5. Remove battery from your phone and hold power for a few seconds, then connect the USB (and never use the main USB port) and insert the battery.
Now Windows should install the flashing cable drivers for your phone.
6. Let it finish (the icon in the system tray indicating new hardware will go away) and close Phoenix and disconnect your phone.
7. Open Phoenix and repeat the previous steps (with the battery out of phone and the phone is not to be connected) for the dead flash.
8. Go through with the flash (and i think Refurbish would not be a bad call on this one) and connect the USB cable then insert the battery (and do NO MORE than that) when prompted by Phoenix. DO NOT press anything on the phone.
9. Phoenix should be prepping the flash...
10. Click OK and hold your breath ;)
-
Hi,
I uninstalled everything and installed Phoenix again. I found no issues on the Internet regarding Phoenix installation under Windows 7. It installed without any problems.
Then I started following your instructions and step 5 did not work. Like I said before when you asked about my drivers, they only install when I power on the phone. Doing as you instructed on step 5 nothing happens. I waited for some time, but Windows does not detect anything.
What's next? (if there is a next step...)
-
Now, you call in the big dog: Nokia Care.
There is no reason it should not work if you are doing it as prescribed.
The deadest of dead phones take that flash (even the E6 after two rounds of N8 firmware still accepted this flash).
A bricked E72 has taken it a number of times as well, so i know v3 phones accept a dead flash.
Mate, i am sorry, but if this is not working you have no option but to hand it to Nokia for the flash. Their software broke your phone so they should be obliged to repair it.
-
Like I said, my phone is not on warranty anymore, so I guess they will not feel any obligation to repair it.
And my Windows can detect my phone and install the drivers, but I have to turn the phone on. Should it not be worth the try to follow your instructions, but then turn on the phone on step 5?
-
That is what you have to ask them to find out. If you just assume they will not and do not ask, they will never do it, right?
You have already tried it that way and reported it was not working.
i told you i would give it a go, but you are not willing to take me up on that and i am not able to do more than tell you the procedure otherwise.
One last try at help, though. Try deleting your files and use Phoenix to download them:
Tools > Data Package Download
Enter your product code and let Phoenix find you a set of files to flash.
-
One last try at help, though. Try deleting your files and use Phoenix to download them:
Tools > Data Package Download
Enter your product code and let Phoenix find you a set of files to flash.
That option is non existent in my Phoenix. Then I tried to install another version and there isn't that option either. My Phoenix is version 2012.50.001.49220
-
Cracked version or regular?
(http://static.dyp.im/f8MPSHEkZm/a5c1728aace2471529abd96709b3855f.png)
-
Hi,
my phone is a nokia 701 dtv (RM-774). When I bought it had the product code 059M727 and software version 111.020.0307. I changed the PC to 059G9T4 and updated for belle 113.010.1506.
Last week I downloaded OFW via nokia care suite and I tried downgrade the system. Obviously, I bricked the phone :P
I followed steps to flash dead phones and tried Phoenix SW reset with OFW (RM-774 111.020.0307), but always get the message:
" The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing. "
The phone will not turn on and when I hold power button only performs one vibration.
In a post I read: "are you downgrading your phone? if "yes" then you just killed your phone..... to make it alive again download Pr1.2 through navifirm flash with that. n then flash with whichever you want to flash."
What this mean?
What the right steps to revive the phone?
Tks!
-
Hi,
my phone is a nokia 701 dtv (RM-774). When I bought it had the product code 059M727 and software version 111.020.0307. I changed the PC to 059G9T4 and updated for belle 113.010.1506.
Last week I downloaded OFW via nokia care suite and I tried downgrade the system. Obviously, I bricked the phone :P
I followed steps to flash dead phones and tried Phoenix SW reset with OFW (RM-774 111.020.0307), but always get the message:
" The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing. "
The phone will not turn on and when I hold power button only performs one vibration.
In a post I read: "are you downgrading your phone? if "yes" then you just killed your phone..... to make it alive again download Pr1.2 through navifirm flash with that. n then flash with whichever you want to flash."
What this mean?
What the right steps to revive the phone?
Tks!
As far as i know, there is no known stable method to downgrade the Belle devices from the FP software versions. You can flash the newest firmware (no need to change your product code) using Dead phone USB flashing > Refurbish to get it back.
-
As far as i know, there is no known stable method to downgrade the Belle devices from the FP software versions. You can flash the newest firmware (no need to change your product code) using Dead phone USB flashing > Refurbish to get it back.
Hi matthew
Problem is that the last version to my phone model is 111.020.0307 (RM-774) and I had installed 113.010.1506. It's possible refurbish in this case?
-
Refurbish using the latest firmware.
-
I repeat steps...
- open Phoenix as administrator
- select "no connection"
- file > open product > RM-774
- flashing > firmware update > ... > product code 059M727 (SW version 111.020.0307 / variant 002)
- check "dead phone usb flashing"
- click "refurbish"
Output show: "Waiting for usb device..."
Meanwhile open a box...
----------
Follow these instructions:
1. disconnect usb cable
2. press and hold power button (at least 8 seconds)
3. connect usb cable
4. press ok
----------
In step 2 the phone only performs one vibration. I think it's strange, because I read in another post that three vibration are expected.
Nothing happens and some time later get the message:
----------
The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
----------
-
No, no the latest software is the 030 software. You can not downgrade your device software, bro.
-
Also, don't press anything on the phone until you connect the USB cable. Then, press the power only if it does not proceed on its own and only until it vibrates once and then let it go.
-
No, no the latest software is the 030 software. You can not downgrade your device software, bro.
030?
-
Sorry! i meant 113 ::)
-
I downoad RM-774 113.010.1506 059G9T4: _lta_light_silver and tried refurbish, but the message keeps poping up:
" The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing. "
-
Can you describe your exact process?
Also, do you have only one set of firmware in your rm-774 folder?
-
And you might try using a different USB port, too.
-
And you might try using a different USB port, too.
Yes...
-
Can you describe your exact process?
Also, do you have only one set of firmware in your rm-774 folder?
In rm-774 folder I have files:
RM-774_113.010.1506_23.01_LTA_and_Brazil_79u_prd.rofs2.fpsx
RM-774_113.010.1506_79u_prd.core.fpsx
RM-774_113.010.1506_C00.01_79u_prd.rofs3.fpsx
RM-774_113.010.1506_U15.01_79u.uda.fpsx
RM774_059K0X1_113.010.1506_037.dcp
RM774_059K0X1_113.010.1506_037.vpl
RM774_059K0X1_113.010.1506_037_signature.bin
I removed all nokia programs (latest nokia suite and phoenix 2012.50.000.49146) and drivers (nokia flashing cable driver, nokia connectivity cable driver, pc connectivity solution) and reinstall them.
When I open phoenix no usb device are detected (in connections show only NO CONNECTION option)
Then I chose:
- file > open product > RM-774
- flashing > firmware update > ... > product code 059K0X1 (SW version 113.010.1506 / variant 037)
- check "dead phone usb flashing"
- click "refurbish"
When the box open I do:
- disconnect usb cable and remove battery
- connect usb cable
- insert battery
- hold power button until a phone vibration (about 1 sec)
- release power button and press "OK"
Output show: "Waiting for usb device..." and then got message:
" The flashing failed. Do you want to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing. "
-
Try this intead:
Phone USB is connected, battery is out.
Begin flash with Refurbish and when that dialog with the 'Remove USB cable...' opens, insert your battery and click 'Ok'
-
I tested too with rm-774 059G9T4 (113.010.1506_039) that is OS I had when I changed the product code.
And configured like below (remove red marked item)
But I think that firmware is not problem. I believe that I'm doing wrong the step "disconnect usb/battery and connect it again".
The battery should be fully charged?
Its normal in connections show only NO CONNECTION option?
-
Try this intead:
Phone USB is connected, battery is out.
Begin flash with Reurbish and when that dialog with the 'Remove USB cable...' opens, insert your battery and click 'Ok'
Doesn't work...
-
Yesterday I had hope!
I removed all nokia references (programs and drivers) and antivirus. Then I cleaned pc with ccleaner.
After that, I installed only phoenix.
First I tried the "SW reset" option. I connected charger, usb cable and battery. Phoenix froze with output message "Scanning image files..."
Then I tried the "Refurbish" option. Did same steps, but this time Windows detected the device and installed the driver automatically. Unfortunately flash failed.
The good news is that Windows sounds when I plug the phone. This did not happen before.
The bad news is that "Boot rom was not detected after phone boot up. Unable to start flashing" message persists.
-
Good news!!
After several attempts it finally worked!
Here the steps:
1. I used my brother's 701 to fully charge the battery (that was almost drained)
2. I disconnected cables and removed battery
3. Open phoenix > file > open product > RM-774
4. Flashing > firmware update > ... > product code 059G9T4 (SW version 113.010.1506)
5. Check "dead phone usb flashing"
6. Click "refurbish"
7. When dialog box opens request to remove usb cable and battery and insert again I do:
--------------------------------------------------------
a. CONNECT CHARGER (very important because without it wasn't working)
b. connect usb cable
c. insert battery
d. press "OK"
--------------------------------------------------------
Than everything went as expected...
The steps 1 and 7a were very important to achieve the goal.
Tks @matthew for the help!
Now my 701 came back to life!
-
:)
Awesome, mate. i am glad it worked ;)
-
i got this error
pls help
--- Press phone's power button! ---
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.
-
i got this error
pls help
--- Press phone's power button! ---
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.
You not pressed the power button?
-
i got this error
pls help
--- Press phone's power button! ---
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.
That really isn't enough of the error message and you could explain a little more what exactly you did, what phone...
Ignore the dialogue. Start the flash without your phone connected. When the dialogue with instructions opens, insert your USB to the PC and phone, then click OK and do nothing more.
-
i use a nokia 2730 classic,i downloaded firmware fro navifirm den i copied extracted files to phoenix/products/rm-578,i connected phone wid usb but phone is switched off ,i started phoenix as administrator i made connection type as no connection den i followed all instructions given wen i clicked on refurbish i got dese instructions: Flashing started
Creating product data items list
Product data items list created
Backup not required
KeepProductInFlashModeAfterFlash is supported only for FPS-X devices. Ignoring the flag
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
i pressed phones power button but nothing happened n after a whili got dis pop up window wid header flashing faiiled:
The flashing failed. Do you like to retry the flashing?
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
wat shud i do?
-
Ignore the dialogue. Start the flash without your phone connected. When the dialogue with instructions opens, insert your USB to the PC and phone, then click OK and do nothing more.
But i have 0 experience flashing S40, so there is little more i can offer
-
whwn exactly shud i connect my phone ??when which instructions come i have to connect d phone?btw problem is my phone doesnt turn on it gets stck in dat startup screen jus whhite screen comes..dis is d reason im flashing..so wen it says press power button while flashing it doesn detect d power button wen i press cos my phone doesn turn on..
-
i said do not switch on the phone; just connect it to the PC with the USB and click Ok when the dialogue box that gives instructions appears.
But, as i mentioned, this is an S60 procedure so i do not know if it will work for S40 in the same way.
-
not working.. and i dindnt get u were to press ok..cos i don get any such option n i connected d device after instructions started coming..
-
Are you using Dead phone USB flashing?
-
(http://static.dyp.im/SZeKHfvukQ/00ed6035ff6190b4274f194b643bf6d9.jpg)
The procedure:
1. File > Open Product > RM-578
2. Flashing > Firmware Update
3. ... > Your Product Code
4. X Dead phone USB flashing
5. Refurbish
6. Dialogue box opens > Connect the (turned off) phone to PC
7. OK
That's it. Do no more and no less.
-
dats exactly wat i did n yaa dead phone flashing
-
Is it? You stated twice that you turn on the phone at the point in the flash where the dialog box opens and i have told you not to turn it on.
-
first of all i don get the same windows which u get abt dat disconnect d cable n all dat instructions were u press ok i dont get it..n i din turn it on i cant turn i on phones dead
-
Please use proper English, text speak is hard for us all to read.
-
..so wen it says press power button while flashing it doesn detect d power button wen i press cos my phone doesn turn on..
You aren't to touch the phone at all.
If you aren't getting this dialogue, why don't you post screenshots of what you see on your screen:
Press PrintScr (which is to the right of F12) then open an image editing program and Edit > Paste.
If you post an image, it is more helpful.
-
i gave it to nokia care..
-
Try again when they reinstall the software ;)
-
i am trying to flash one more phone which is nokia 5130 xpressmusic,while doing this i get these instructions
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
and after a minute or so i get a pop up instruction window which shows :
The flashing failed. Do you like to retry the flashing?
HRESULT 0x8401f145 (-2080247483)
Flash: Failed to retrieve media information from USB connection. Check USB connection to phone and/or application's installation.
anyone have any idea what this error is?