Hello,
So I got Nokia 5800 (RM-356)with damaged firmware(when pressing power button it just vibrated)
tried to flash using JAF(newest firmware, downloaded using navifirm) it hung on "Pooling Phone" amm.. and it seems phone was flashed before and had another product code(has been unbranded) or had CFW so it got bricked(DEAD, no reaction when I press power button(no vibration), but PC can see it when USB is plugged(just for few secs) and flashers(JAF and Phoenix (2012 & 2008)) can see it but I am unable to read device data now(like prod code, SW version..) then I tried to flash older firmwares etc(idk.. maybe PM got damaged)
System - XP SP3 x86, tried another computer with xp and also different USB ports, same.
So my question is do I have sth to try or I need to contact service center for PM repair + full flash?
if you have any suggestions I'll give it a try..
And JAF and Phoenix logs:
Phoenix:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2910927 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 1475939 KB...
Asic CMT: Partitioning RM-356_60.0.003_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_60.0.003_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_60.0.003_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Programming 8%
Asic CMT: Programming RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Programming RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00080000
Asic CMT: ERROR Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5800_SW_0634466_EURASIA_8G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
Boot rom detected. Continuing flashing...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2910927 bytes
Update server loaded
Asic CMT: Verifying communication to device...
UPS flashed and initialized. Continuing flashing...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 1475939 KB...
Asic CMT: Partitioning RM-356_60.0.003_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_60.0.003_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_60.0.003_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Programming 8%
Asic CMT: Programming RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Programming RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00080000
Asic CMT: ERROR Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5800_SW_0634466_EURASIA_8G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
Boot rom detected. Continuing flashing...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2910927 bytes
Update server loaded
Asic CMT: Verifying communication to device...
UPS flashed and initialized. Continuing flashing...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 1475939 KB...
Asic CMT: Partitioning RM-356_60.0.003_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_60.0.003_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_60.0.003_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Programming 8%
Asic CMT: Programming RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Programming RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00080000
Asic CMT: ERROR Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5800_SW_0634466_EURASIA_8G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
Boot rom detected. Continuing flashing...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2910927 bytes
Update server loaded
Asic CMT: Verifying communication to device...
UPS flashed and initialized. Continuing flashing...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 1475939 KB...
Asic CMT: Partitioning RM-356_60.0.003_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_60.0.003_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_60.0.003_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Programming 8%
Asic CMT: Programming RM-356_60.0.003_C03_prd.rofs3.fpsx
Asic CMT: Programming RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00080000
Asic CMT: ERROR Programming 5800_SW_0634466_EURASIA_8G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5800_SW_0634466_EURASIA_8G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted
Phoenix without mem card content:
Flashing started
Creating product data items list
Product data items list created
Backup not required
KeepProductInFlashModeAfterFlash is supported only for FPS-X devices. Ignoring the flag
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2910927 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 143316 KB...
Asic CMT: Partitioning RM-356_60.0.003_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_60.0.003_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.003_C02_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_60.0.003_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming RM-356_60.0.003_prd.rofs2.V04
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming RM-356_60.0.003_C02_prd.rofs3.fpsx
Asic CMT: Programming RM-356_60.0.001_026_000_U01.uda.fpsx
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted
JAF:
JAF version 1.98.62
Detected PKEY: 9000AAC9
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.101.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini...
Checking path: \Products\RM-356\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-356\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V04
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C02_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx
Languages in ppm: English,German,Estonian,Russian,Lativian,Lithuanian
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
...........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 655, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V04...
Erasing cmt zone 07180000 - 0915FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C02_prd.rofs3.fpsx...
Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx...
Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V04...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C02_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Done!
