Symbian-Developers
Symbian^3, Anna, Belle Forum => Symbian^3 Custom Firmware Discussions => Flashing Tutorials (Updating and Downgrading) => Topic started by: UpakulRox on February 11, 2012, 03:06:11 pm
-
Flash Nokia Belle in your N8/C7/E7/E6/X7/Oro :)
Note:
Steps in brief:
1. Download and Install Nokia Suite (http://nds1.nokia.com/files/support/global/phones/software/Nokia_Suite_webinstaller_ALL.exe)
2. Download and install Phoenix (http://sdf.allstarsoftware.co.uk/index.php?topic=10.0)
3. Now follow this guide to know how to download the firmware files files for your device via NAVIFIRM Guide (http://sdf.allstarsoftware.co.uk/index.php?topic=843.msg4481#msg4481)
5. Follow the below procedure for flashing with those firmware files!
For Nokia N8, you must place your downloaded files in the folder "RM-596" and follow the tutorial below.
For other mobiles, see the list
Product - Folder Name
Nokia N8 - RM-596
Nokia C7 - RM-675
Nokia E7 - RM-626
Nokia X7 - RM-707
Nokia C6-01 - RM-718/RM-601
Nokia 500 - RM-750
Follow the below tutorial perfectly but only make changes in the 1st step for other mobiles.
1. Assuming that Phoenix Service Software is already installed. Download the Symbian Belle Firmware Files, Put them in a folder "RM-596" and place the folder under C:\Program Files\Nokia\Phoenix\Products. Look at the image below.
Here's a tutorial video:
http://youtu.be/7mH7dd2ohuc (http://youtu.be/7mH7dd2ohuc)
1. Assuming that Phoenix Service Software is already installed. Download the Symbian Belle Firmware Files, Put them in a folder "RM-596" and place the folder under C:\Program Files\Nokia\Phoenix\Products. Look at the image below.
If your device is not N8 and for example C7 then put downloaded files in folder "RM-675" instead of RM-596 above, put your own firmware folder in "C:\Program Files\Nokia\Phoenix\Products" and continue. Do same for other models. I have already listed what folder name to give for specific S^3 models
(http://2.bp.blogspot.com/-sDGB5ads0Ag/TxK1R1j3KTI/AAAAAAAAFfs/FT-QrqDwGkI/s1600/Image00030.jpg)
2. Launch the Phoenix Service Software. Select "USB1 - RM596" from the Connections drop-down. This can say USB2 or USB3, etc instead of USB1 if you have many USn cable connected to your computer.
(http://1.bp.blogspot.com/-LOVhlQRXswM/TxK26I66ETI/AAAAAAAAFf0/IT-LH4KHgSY/s1600/Image00031.jpg)
3. Once you are done with the above step, the Phoenix Service Software would look like the image below. The bottom of the GUI will say "Ready".
(http://2.bp.blogspot.com/-zNdTYQ_yrPA/TxK35AQ320I/AAAAAAAAFf8/zAGjKgSrIyo/s1600/Image00032.jpg)
4. Select File -> Scan Product from the top menu options.
(http://1.bp.blogspot.com/-TwDhL_oXuU4/TxK4YorJfgI/AAAAAAAAFgE/X5U7lkTh-XY/s1600/Image00033.jpg)
5. The Phoenix Service Software will scan the connected Nokia N8 as a result of the step above and start showing the current version of the firmware on your phone. Look at the image below.
(http://1.bp.blogspot.com/-QQZI4ls5HAg/TxK440Eg8qI/AAAAAAAAFgU/A6rjrEl-Ke0/s1600/Image00034.jpg)
6. Now, select Flashing -> Firmware Update from the top menu options.
(http://2.bp.blogspot.com/-WrDmWfChxJs/TxK5hN3Gu8I/AAAAAAAAFgc/aWTrwg4YkD4/s1600/Image00036.jpg)
7. As a result of the above step, a new window "Firmware Update" will open within the Phoenix Service Software.
(http://2.bp.blogspot.com/-MkEghVP4DXw/TxK5-LdayCI/AAAAAAAAFgk/v1rkyJv5R-w/s1600/Image00037.jpg)
8. Click on the button "..." at the side of the Product Code label in the window "Firmware Update".
(http://2.bp.blogspot.com/-XVY6Qmh6ge4/TxK6eUpMg0I/AAAAAAAAFgs/6FSBLAtdO64/s1600/Image00038.jpg)
9. As a result of the step above, a new window "Product codes available in current Data-Package" will open. Select "euro3_dg" and click on OK button.
(http://1.bp.blogspot.com/-_IHEEqJHzmY/TxK7JEwc1LI/AAAAAAAAFg0/mKlCABf89nk/s1600/Image00039.jpg)
Note: The product will get listed only if you have performed step 1 of this guide correctly.
10. As a result of the step above, the selected code should now be visible in the window "Firmware Update".
(http://1.bp.blogspot.com/--QOsJKPuH2Y/TxK71vaik_I/AAAAAAAAFg8/gn3rLJFHUUU/s1600/Image00040.jpg)
11. Now click on the "Options" button. A new window will open listing all the firmware files. You need to delete the files that appear in red font. Simply click on the entry in red and click on "Delete" button.
(http://1.bp.blogspot.com/-abedDPYljsY/TxL7D4DoNnI/AAAAAAAAFiE/i0eUXaIRaNA/s1600/Image00047.jpg)
Remove the files appearing in red font
(http://4.bp.blogspot.com/-McI77pWfaWo/TxL7OV6470I/AAAAAAAAFiM/8Ah8rx0Ab7k/s1600/Image00048.jpg)
Select the file entry and click on delete
(http://4.bp.blogspot.com/-McI77pWfaWo/TxL7OV6470I/AAAAAAAAFiM/8Ah8rx0Ab7k/s1600/Image00048.jpg)
After deleting the files appearing in red font
(http://3.bp.blogspot.com/-EsLYPTbFUAI/TxL654IJhpI/AAAAAAAAFh8/-vqgfhUuzoM/s1600/Image00049.jpg)
12. Now we are good to go. The final step is to click on "Refurbish" button on the "Firware Update" window.
(http://3.bp.blogspot.com/-3tI4ShQieI0/TxK8RvL_YxI/AAAAAAAAFhE/419Y2jrp8wU/s1600/Image00041.jpg)
13. After clicking on the Refurbish button, you need to have a little bit of patience while the phone gets update with Symbian Belle. At times, you might feel that the software is stuck but wait until it actually throws up an error and notifies you of any action. Look at the images below.
(http://2.bp.blogspot.com/-F13AIkm15t4/TxK-SiRrE_I/AAAAAAAAFhM/YIyzy44WIu0/s1600/Image00042.jpg)
At this stage, the software takes a lot of time before moving forward so keep your cool.
(http://1.bp.blogspot.com/-fp3-HybvyHI/TxK-xvPappI/AAAAAAAAFhc/sHU0SUoau0s/s1600/Image00043.jpg)
At this stage the actual firmware update has completed and the phone should restart.
(http://3.bp.blogspot.com/-RrMuCiVplTo/TxK_dR6kt0I/AAAAAAAAFhs/8e_JfNOQPAc/s1600/Image00044.jpg)
If you see this error at the end of the process with a popup, you need not worry. Simply press the power on button at the top of the phone. Everything should work as usual and the new OS boots!
-
nice tutorial...+1 :D:D:D
-
nice tutorial...+1 :D:D:D
thx :)
-
Here is my problem while flashing belle to nokia 500:
When I go to "..." and I select the "product code" it gives me this error message:
http://img7.imageshack.us/img7/566/capturenbb.jpg (http://img7.imageshack.us/img7/566/capturenbb.jpg)
HOW TO SOLVE THIS??
-
Here is my problem while flashing belle to nokia 500:
When I go to "..." and I select the "product code" it gives me this error message:
http://img7.imageshack.us/img7/566/capturenbb.jpg (http://img7.imageshack.us/img7/566/capturenbb.jpg)
HOW TO SOLVE THIS??
what are the files that you downloaded???
I think some files are missing...
-
I used the files you uploaded. Now I am downloading files from navifirm. Its almost done, I will try out with them, and if the same happens i will inform you.
Edit:
I downloaded the first one on navifirm, and now it works. Thx for your help!
-
I used the files you uploaded. Now I am downloading files from navifirm. Its almost done, I will try out with them, and if the same happens i will inform you.
Edit:
I downloaded the first one on navifirm, and now it works. Thx for your help!
welcome bro :))
-
upakul bro this the error . wat i have to do?
when i tried to open pheonix this is the error i am getting
[attachment deleted by admin]
-
upakul bro this the error . wat i have to do?
when i tried to open pheonix this is the error i am getting
try reinstall phoenix...and makesure before installing it turn off/disable your antivirus...:)
-
upakul bro this the error . wat i have to do?
when i tried to open pheonix this is the error i am getting
1. Clear your temp files, go run> %temp% > and clear
2. Make sure Nokia SUite is installed
3. Reinstall Phoenix
-
I get this error when I try and install Phoenix (Phoenix_Service_Software_2011.46.002.47246_Cracked.exe) :( ....What should I do? thanks in advance :)
[attachment deleted by admin]
-
I get this error when I try and install Phoenix (Phoenix_Service_Software_2011.46.002.47246_Cracked.exe) :( ....What should I do? thanks in advance :)
don't worry, there is no virus in this software, I personally tested it, disable antivirus during installation of Phoenix..
some antivirus gives this fake warning..
-
don't worry, there is no virus in this software, I personally tested it, disable antivirus during installation of Phoenix..
some antivirus gives this fake warning..
I made AVG ignore the file and installed Phoenix but still i cannot get into phoenix because it keeps saying attach some dongle. What should I do?
-
I made AVG ignore the file and installed Phoenix but still i cannot get into phoenix because it keeps saying attach some dongle. What should I do?
that error happen because some of the phoenix file deleted by antivirus software while installing...it used to happen to me...i just uninstall my antivirus and install phoenix...then reinstall my antivirus...try disable your antivirus temporary for installing phoenix...:)
-
I cant get phoenix to open :/
-
I cant get phoenix to open :/
Try to re-install it
-
Try to re-install it
i have like 5 times it always says Open with Nokia suite or Save File
I have done both yet still not opening
-
i have like 5 times it always says Open with Nokia suite or Save File
I have done both yet still not opening
which file are u clicking?
Phoenix is a program? What open with Nokia Suite??
U need to install it
-
which file are u clicking?
Phoenix is a program? What open with Nokia Suite??
U need to install it
i trying to download the one from mediafire i have nokia suite installed
-
Try to re-install it
Try to re-install it
OH yes i got it
-
Sir when i have downloaded the belle files for 500 it has downloaded but when i m trying to install by phoenix u have said in Tutorial that delete the the files which are in red but in my process all the files are red.When i have deleted all the files reblushing is not occuring.Please give me way to download belle for 500.please sir reply.......
-
Sir when i have downloaded the belle files for 500 it has downloaded but when i m trying to install by phoenix u have said in Tutorial that delete the the files which are in red but in my process all the files are red.When i have deleted all the files reblushing is not occuring.Please give me way to download belle for 500.please sir reply.......
where you placed your files?
location is
C:\Program Files\Nokia\Phoenix\Products\RM-XXX
hope this will solve your problem :)
Make sure..... you have downloaded correct files :D
-
i have already hacked my phone without flashing, can flash my c6-01
-
You sir kept me from being a silly filly again after destroying the system on my c7.
Thank you! ^_^
-
I can't Find My Rm-675 Folder In pRoducts folder
-
I can't Find My Rm-675 Folder In pRoducts folder
no issues just create the folder and place the files. That's it
-
Can anyone Give me a link for tutorial of nokia firmware Editor
-
Can anyone Give me a link for tutorial of nokia firmware Editor
check this tutorial.
http://sdf.allstarsoftware.co.uk/symbian3-modding/(tutorial)-how-to-add-rompatcher-others-apps-in-rofs2-video/
-
check this tutorial.
http://sdf.allstarsoftware.co.uk/symbian3-modding/(tutorial)-how-to-add-rompatcher-others-apps-in-rofs2-video/
i have downloaded all files for nokia 701..
there was a problem i was facing...whenever i was connecting cp to pc through usb, it was directly getting connected as masss storage..
i have flashed in dead usb mode...
worked successfully :D
thnku master -pR for all ur help...
(btw tht 848MB file contains angry birds and asphalt 5)
-
that's good :) now you flash with a cfw too :)
-
that's good :) now you flash with a cfw too :)
sorry i forgot to add ur name....thnx for ur help :)
-
don't worry :) hope you flash a cfw and enjoy your 701 :)
-
i have downloaded all files for nokia 701..
there was a problem i was facing...whenever i was connecting cp to pc through usb, it was directly getting connected as masss storage..
i have flashed in dead usb mode...
worked successfully :D
thnku master -pR for all ur help...
(btw tht 848MB file contains angry birds and asphalt 5)
glad i was able to help you :) if i had helped you just press the thank you button under my profile ;)
-
I have Nokia c7 And I have put Few mods in rofs 2.....When I click On options In phoenix.....I have All the files in red colour..... what to do
????
-
I have Nokia c7 And I have put Few mods in rofs 2.....When I click On options In phoenix.....I have All the files in red colour..... what to do
????
make sure you have put the files in correct path nokia/phoenix/products/rm-ur rm number
-
Great Post,...
ThanQ SoOo Much I Shifted To Symbian Belle,...
From My Nokia N8 !...
:D :D :D :D :D :D
-
Iam Facing This Problem....Please Help
[attachment deleted by admin]
-
hey last time i downgraded my c7 from bella to anna using v22 software which was not matching with my product code but i just used it to get rid of bella....it turned out to be an 3g network variant which is creating a lot of problems and won't let me use apps like skype so i have now downloaded a v24.1 variant matching with my product code, just need to clarify few things if any one can help me on tht
1. which phoenix version should i use this time?
2. do i have to use the same usb mode while keeping my phone on when i connect it to the pc in the start?
3. and which button should i use? update or refurbish? like the way u have illustrated above? plz let me know as soon as possible
thanx in advance
-
hey last time i downgraded my c7 from bella to anna using v22 software which was not matching with my product code but i just used it to get rid of bella....it turned out to be an 3g network variant which is creating a lot of problems and won't let me use apps like skype so i have now downloaded a v24.1 variant matching with my product code, just need to clarify few things if any one can help me on tht
1. which phoenix version should i use this time?
2. do i have to use the same usb mode while keeping my phone on when i connect it to the pc in the start?
3. and which button should i use? update or refurbish? like the way u have illustrated above? plz let me know as soon as possible
thanx in advance
about phoenix you can use the latest version, yes do as the steps says and about the usb mode-i can't get you???
-
i mean i have to connect phone in and chose NO Connection mode or usb rm-675 mode? as it has been illustrated in the guide above????
-
i mean i have to connect phone in and chose NO Connection mode or usb rm-675 mode? as it has been illustrated in the guide above????
You don't need to connect the mobile while setting up the phoenix, you'll need to connect the mobile only when the phoenix asks you to do it and make sure you use the software update and refurbish as mentioned or you won't be able to downgrade it easily ;)
-
Thanks for your help, what i wanted to ask, may be i wasn't able to make my self clear to you. Any way i have upgraded to 24.1v successfully. I was wondering if you can make this guide a bit more comprehensive as there are not so many people around who are familiar with this procedure and they might find it confusing, if they are using it for the first time, like me.
The information which was bothering me and wasn't available in this guide was that:
1. connect your phone in "on" condition to the pc
2. then select usb-rm(xxx) for your mobile phone as the connection type
3. and then scan your product and go on with the rest of the procedure mentioned as it is in the guide
that implies for upgrading i guess and for downgrading one has to set "No Connection" type and then chose "dead usb flashing" option, that's so far i have understood from this site. Pardon me if i am wrong, thanx any way and keep up the good work. :)
-
Good morning.
I've bought an E6 5 days ago, but I'm noob in flashing. I would like to know what is the point of flashing, when the official firmware is downloadable for free?
However, my E6 is still with Anna.
Could someone suggest me what should I do (firmwares, apps etc.) to unleash the true potential of this phone? Thanks
-
Good morning.
I've bought an E6 5 days ago, but I'm noob in flashing. I would like to know what is the point of flashing, when the official firmware is downloadable for free?
However, my E6 is still with Anna.
Could someone suggest me what should I do (firmwares, apps etc.) to unleash the true potential of this phone? Thanks
People flash to edit the firmware or if they have a problem or simply want to update.
-
People flash to edit the firmware or if they have a problem or simply want to update.
Thanks
So the firmware on this topic is modified\better than the original one?
-
Thanks
So the firmware on this topic is modified\better than the original one?
No this is just a guide to flashing.
-
i just unlocked my nokia 500 on symbian anna and im planning on flashing it to symbian belle. will this update revert it to being locked again??
-
i already tried 3 fw downloaded from navifirm but all of them have red components what do i do?
-
doesn't work for me bro.. it ends up to a dead cellphone... i cant change my fw back to its original
-
you tried hard reset?
-
doesn't work for me bro.. it ends up to a dead cellphone... i cant change my fw back to its original
may be u messed up some files.
-
i already tried 3 fw downloaded from navifirm but all of them have red components what do i do?
make sure you put the fw files in Rm-XXX folder and the path is correct
-
it is contonuously appearing that 'Starting to recover the phone" and else happen...
-
halo sir please remove this add because this is fake im so-many times trying to flash nokia 500 but if downgrade mobile only viration then iam contact so-many seiner mobile services they are telling this is not possible for doing you must go to nokia service centres you have not trying flash this telephone because if phone will be dead your own risk if any other successful solution please call my no 00971 -0555201431 or contact- www.rafisalam@gmail.com
-
halo sir please remove this add because this is fake im so-many times trying to flash nokia 500 but if downgrade mobile only viration then iam contact so-many seiner mobile services they are telling this is not possible for doing you must go to nokia service centres you have not trying flash this telephone because if phone will be dead your own risk if any other successful solution please call my no 00971 -0555201431 or contact- www.rafisalam@gmail.com
Try using dead flashing mode. Coz I've been using this method to flash for ages :/
-
it is contonuously appearing that 'Starting to recover the phone" and else happen...
Give a hard reset and flash it again with dead flashing.
-
Hey bro, After selecting option every file is in red color ...............any suggestion for this
-
I dont get the files in red colour for deletion.. Wat files do i need to delete. I am using Nokia N8..
-
please help!!!
no connection is showing in the connection baar after connect my phone. I try almost everything but problem is remaining same :'( :'(
phone model: C6-01
[attachment deleted by admin]
-
Hello everyone, i'm trying to flash my 808 PureView with Belle FP2, I know that I can use the option Software Reset but the Refurbish one needs the "memory card content" file that is around ~1,5GB. What kind of content will flash that file to my phone? I know that file is optional but it's recommended to install it?
Thanks.
-
Hello everyone, i'm trying to flash my 808 PureView with Belle FP2, I know that I can use the option Software Reset but the Refurbish one needs the "memory card content" file that is around ~1,5GB. What kind of content will flash that file to my phone? I know that file is optional but it's recommended to install it?
Thanks.
it ll have some stuffs that come pre-loaded like free music, videos and some more other stuffs. If you're going to flash with that file then make sure you're having a backup of your mass memory or it ll get wiped while flashing. And good luck flashing the beast ;)
-
Thanks for reply me =)
Flashing the beast... ;)
-
Thanks for reply me =)
Flashing the beast... ;)
coool 8)
-
Hello, the product code of my phone is 059K180 (Nokia X7).
is that a version BELLE is available from PC Suite directly?
-
IMPORTANT note for those geting all RED files when trying to update.
The firmware files you download will likely be in a subfolder that matches the product code of the download. Example C:\Program Files\Nokia\Phoenix\Products\RM-xxx\059abc\files_are_here.xyz
Move the files out of that subfolder and right into your RM-xxx folder, like this:
C:\Program Files\Nokia\Phoenix\Products\RM-xxx\files_are_here.xyz
Guess how I learned that... ;-)
-
i had to use "reset software" for it to work, but it worked! :)
-
Hi,
I've installed the Firmware files in Phoneix products folder correctly.Still i'm getting an error.Plz find the attached image which displays the error.
Plz let me know the way to proceed further.
[attachment deleted by admin]
-
I've installed the Firmware files in Phoneix products folder correctly.
Sorry, but that message means you did not get the files in the correct directory.
See if this helps: http://www.keyables.com/2012/12/fix-phoenix-neither-dp10-nor-dp20-was-found.html
If not, please tell us what version of Windows (i see it's 7, is it 32 or 64 bit?) and please list the files you have.
-
excellent tutorial I update my E7 product version 059D7P6 and now getting update from Nokia suite
d
-
Hey guys,
I am not able to flash my Nokia E-7
When i press "..." it gives me error and not showing any result
-
Can you please give a bit more detail about the error?
A screenshot of the error message?
An overview of all the steps you took up to the error?
Thank you :)
-
-I Copied RM-626 in the product folder.
-Scanned product
-In the firmware update i selected the product code.
-In option tab, i deleted the red file
-Cliked on Refurbrish tab
-Started flashing
-In the middle of flashing while ''Erasing phone data'' it gives an error saying Disconnect and reconnect the cable and retry..
-I disconnected the cable reconnect it but still the same message.
-
Secondly, i Have already upgraded to ma NOKIA E7 to belle but after installing belle my phone is showing unexpected behavior,
Ma phone is operating automatically
When i restart d phone automatically some keys are getting pressed, and not allowing me to operate d phone..
Any idea on this..
Thank you..
-
Try with the phone off and not connected to the PC.
Manually select the product, tick the dead phone USB flashing box then select the product code and start the refurbish. When the dialogue box informing you to disconnect the USB cable appears, connect the phone and press the OK button (do not press power on the phone).
-
Hi, thanks for the quick reply and valuable advice, but I tried with the dead phone flashing also but still the same,
Problem with my phone is that it operates automatically showing unexpected behavior after installing Belle,
Touch pad operates without touching it, touch keypad operates automatically,
I cant figure out whether its software problem or hardware problem.
Do you thing flashing will help me in solving this problem??
Thank you
-
Sounds like a hardware issue to me =o/